This page was drafted with generative-AI assistance and is pending HCIC engineering and compliance review prior to publication.
HCICHydraulic Cylinders

Front Loaders · Build-to-Order · Aftermarket

Arm / Lift Cylinders for Front Loaders

Status: aftermarket, build-to-order replacement cylinders — not original equipment parts; manufactured only to the customer-approved drawing (Drawing for Approval).

HCIC builds arm / lift cylinders to order for front loader bodies — 29 documented configurations across 17 vehicle models from single-stage rod designs, each listed individually in the configuration cards below (Dempster®, E-Z Pack®, Heil®, Kann Manufacturing®, Leach®, McNeilus®, Pak-Mor®, Wittke®). Every unit is engineered to the customer-approved drawing under ISO 6020 / 6022 design practice, with an 18-month warranty and a 48-hour quotation.

Request a QuotationView Brand Fitment
ISO 6020 / 6022 design reference18-Month Warranty (written terms apply)48-Hour QuotationMOQ 1 PieceDrawing for Approval

What This Cylinder Does

On a front loader, this cylinder raises and lowers the loading arms that pick up commercial containers. HCIC manufactures it as a build-to-order ' 'replacement unit: send the vehicle model, the function position, and a nameplate photo, ' 'drawing or sample, and HCIC engineers issue a Drawing for Approval for your written ' 'confirmation before production.

Fig. 1 — Arm / Lift Cylinders position on a front loader body (reference vehicle: Leach Front Loader)
Arm / Lift Cylinders position reference on a front loader body (Leach Front Loader) - source application guide figure
Reference figure reproduced from the source third-party application guide for identification of the cylinder function position only. HCIC cylinders are manufactured to the customer-approved drawing, not to this figure.

Brand & Vehicle Fitment

Arm / Lift Cylinders documented across 17 vehicle models from 8 brands. Third-party names identify the vehicle application only — see the Trademark Notice below.

BrandModelsCompatible vehicle models
Dempster®3Dempster, DM2 Front Loader; Dempster, DP80 & XHD Front Loader; Dempster, RFL Residential Front Loader
E-Z Pack®3E-Z Pack FL10, FLOO10 Hercules Front Loader; E-Z Pack FL80, FLOO80 Hercules Front Loader; E-Z Pack, Hercules Residential Front Loader
Heil®2Heil Front Loader; Heil Half Pack III Front Loader
Kann Manufacturing®2Kann CoCollector Front Loader; Kann One Pass Front Loader
Leach®1Leach Front Loader
McNeilus®4McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full Eject; McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity Dump; McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack Dump; McNeilus (MTM) 4080, 4081, 4380 & 4381 Pacific
Pak-Mor®1Pak-Mor FPE800 Front Loader
Wittke®1Wittke Starlight Front Loader

Fitment entries are compiled from third-party application listings for identification and enquiry purposes only. Fitment does not imply interchangeability with any listed part or authorization by any listed manufacturer.

Documented Configurations by Vehicle Model

Arm / Lift Cylinders across 17 vehicle models. Each card below lists the documented reference dimensions, OEM reference numbers (identification only) and the HCIC build-to-order model for that vehicle. HCIC cylinders are manufactured only to the customer-approved drawing.

Dempster® Dempster, DM2 Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		2.5 in
63.5 mm		46.88 in
1190.8 mm		DB8752, AB29244HCIC-FEL-ARM-0001
4 in
101.6 mm		2 in
50.8 mm		24 in
609.6 mm		AB19869THHCIC-FEL-ARM-0001

Dempster® Dempster, DP80 & XHD Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		2.5 in
63.5 mm		46.8 in
1188.7 mm		BB8000, BB8185, BB8374-1, AB19775TH, AB19890THHCIC-FEL-ARM-0002
5 in
127 mm		2.5 in
63.5 mm		46.88 in
1190.8 mm		AB28802HCIC-FEL-ARM-0002

Dempster® Dempster, RFL Residential Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2.5 in
63.5 mm		32 in
812.8 mm		AB29405, CB11061HCIC-FEL-ARM-0003

E-Z Pack® E-Z Pack FL10, FLOO10 Hercules Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5.5 in
139.7 mm		3 in
76.2 mm		49.13 in
1247.9 mm		20-48519 D5549DA, 20-52355 K5549ADA 21-12851 K5549BDA, 21-15639 C5549CDAHCIC-FEL-ARM-0004

E-Z Pack® E-Z Pack FL80, FLOO80 Hercules Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2 in
50.8 mm		49.13 in
1247.9 mm		20-46119 4549DA, 20-46163 D4549ADA, 20-46171 D4549BDA, 20-49273 D4549EDA, 20-52344 K4549LDAHCIC-FEL-ARM-0005
4.5 in
114.3 mm		2 in
50.8 mm		49.13 in
1247.9 mm		21-05358 K4549MDA, 21-15641 C4549NDAHCIC-FEL-ARM-0005

E-Z Pack® E-Z Pack, Hercules Residential Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		2 in
50.8 mm		51.31 in
1303.3 mm		21-03855 K3551ADA 21-15643 C3551BDAHCIC-FEL-ARM-0006
4.5 in
114.3 mm		2 in
50.8 mm		51.31 in
1303.3 mm		21-06343 K4551CDA 21-15645 C4551EDAHCIC-FEL-ARM-0006

Heil® Heil Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2.5 in
63.5 mm		41.5 in
1054.1 mm		1-5098, 1-5150, 1-6370, 1-6388HCIC-FEL-ARM-0007

Heil® Heil Half Pack III Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2.5 in
63.5 mm		41.5 in
1054.1 mm		1-4871HCIC-FEL-ARM-0008
4.5 in
114.3 mm		2.5 in
63.5 mm		41.5 in
1054.1 mm		1-5098, 1-5150, 1-6370, 1-6388HCIC-FEL-ARM-0008

Kann Manufacturing® Kann CoCollector Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		2 in
50.8 mm		38 in
965.2 mm		1400135HCIC-FEL-ARM-0009
3.5 in
88.9 mm		2 in
50.8 mm		38 in
965.2 mm		1400136HCIC-FEL-ARM-0009

Kann Manufacturing® Kann One Pass Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		2 in
50.8 mm		38 in
965.2 mm		1400103HCIC-FEL-ARM-0010

Leach® Leach Front Loader

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2.5 in
63.5 mm		42 in
1066.8 mm		306459, 306635HCIC-FEL-ARM-0011
4.5 in
114.3 mm		2.5 in
63.5 mm		44.25 in
1124 mm		306636, 305241, 305240, 306465HCIC-FEL-ARM-0011
4.5 in
114.3 mm		2.5 in
63.5 mm		42 in
1066.8 mm		305112, 305127, 306463, 306464, 306633HCIC-FEL-ARM-0011
4.5 in
114.3 mm		2.5 in
63.5 mm		44.25 in
1124 mm		306634HCIC-FEL-ARM-0011

McNeilus® McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full Eject

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2.5 in
63.5 mm		46 in
1168.4 mm		0619891, 0619891, 1000069, 1144708 9570.614366, 9570.614380, 9570.619891HCIC-FEL-ARM-0012
5 in
127 mm		2.5 in
63.5 mm		44.55 in
1131.6 mm		0604120, 9272.604120, 9570.604120HCIC-FEL-ARM-0012

McNeilus® McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity Dump

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2 in
50.8 mm		46 in
1168.4 mm		0614366, 0619891, 1000069, 1144708, 9570.614366, 9570.614380, 9570.619891HCIC-FEL-ARM-0013

McNeilus® McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack Dump

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2.5 in
63.5 mm		46 in
1168.4 mm		0619877, 9570.619877HCIC-FEL-ARM-0014
4.5 in
114.3 mm		2.5 in
63.5 mm		46 in
1168.4 mm		0614366, 0619891, 1000069,1144708, 9570.614366, 9570.614380, 9570.619891HCIC-FEL-ARM-0014

McNeilus® McNeilus (MTM) 4080, 4081, 4380 & 4381 Pacific

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2 in
50.8 mm		46 in
1168.4 mm		0660777, 1000158, 1145515, 9570.660777HCIC-FEL-ARM-0015

Pak-Mor® Pak-Mor FPE800 Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		2 in
50.8 mm		43.13 in
1095.5 mm		4149004HCIC-FEL-ARM-0016

Wittke® Wittke Starlight Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2 in
50.8 mm		45.38 in
1152.7 mm		FLHC-26B, 016-9900HCIC-FEL-ARM-0017
4.5 in
114.3 mm		2 in
50.8 mm		45.38 in
1152.7 mm		FLHC-28C, FLHC-26C, 018-9900HCIC-FEL-ARM-0017

Reference Dimensions & HCIC Build-to-Order Parameters

29 documented configurations for arm / lift cylinders on front loader bodies (source application guide pp. 80–157). Third-party reference data and HCIC build-to-order parameters are shown in two physically separate tables.

Reference Data Disclaimer

The dimensional information in the table below is compiled from publicly available third-party refuse-body cylinder application and crossover listings, and is reproduced for identification and enquiry purposes only. The original publisher states that such crossover and application data is "for reference only, and no other conditions are expressed or implied." HCIC does not warrant the accuracy or completeness of third-party reference data and does not represent it as HCIC's own measured specification. Bore, rod and stroke figures are indicative values only; final manufacturing dimensions, tolerances, materials, seal configurations, pressure ratings and port/mounting interfaces are determined solely by the drawing approved by the customer for each order.

Table A — Third-party reference data (for identification only)

Vehicle modelBrandOEM ref. part numbers
(identification only)		Bore
in / mm		Rod
in / mm		Stroke
in / mm
Dempster, DM2 Front LoaderDempster®DB8752, AB292445
127 mm		2.5
63.5 mm		46.88
1190.8 mm
Dempster, DM2 Front LoaderDempster®AB19869TH4
101.6 mm		2
50.8 mm		24
609.6 mm
Dempster, DP80 & XHD Front LoaderDempster®BB8000, BB8185, BB8374-1, AB19775TH, AB19890TH5
127 mm		2.5
63.5 mm		46.8
1188.7 mm
Dempster, DP80 & XHD Front LoaderDempster®AB288025
127 mm		2.5
63.5 mm		46.88
1190.8 mm
Dempster, RFL Residential Front LoaderDempster®AB29405, CB110614
101.6 mm		2.5
63.5 mm		32
812.8 mm
E-Z Pack FL10, FLOO10 Hercules Front LoaderE-Z Pack®20-48519 D5549DA, 20-52355 K5549ADA 21-12851 K5549BDA, 21-15639 C5549CDA5.5
139.7 mm		3
76.2 mm		49.13
1247.9 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®20-46119 4549DA, 20-46163 D4549ADA, 20-46171 D4549BDA, 20-49273 D4549EDA, 20-52344 K4549LDA4.5
114.3 mm		2
50.8 mm		49.13
1247.9 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®21-05358 K4549MDA, 21-15641 C4549NDA4.5
114.3 mm		2
50.8 mm		49.13
1247.9 mm
E-Z Pack, Hercules Residential Front LoaderE-Z Pack®21-03855 K3551ADA 21-15643 C3551BDA3.5
88.9 mm		2
50.8 mm		51.31
1303.3 mm
E-Z Pack, Hercules Residential Front LoaderE-Z Pack®21-06343 K4551CDA 21-15645 C4551EDA4.5
114.3 mm		2
50.8 mm		51.31
1303.3 mm
Heil Front LoaderHeil®1-5098, 1-5150, 1-6370, 1-63884.5
114.3 mm		2.5
63.5 mm		41.5
1054.1 mm
Heil Half Pack III Front LoaderHeil®1-48714.5
114.3 mm		2.5
63.5 mm		41.5
1054.1 mm
Heil Half Pack III Front LoaderHeil®1-5098, 1-5150, 1-6370, 1-63884.5
114.3 mm		2.5
63.5 mm		41.5
1054.1 mm
Kann CoCollector Front LoaderKann Manufacturing®14001353.5
88.9 mm		2
50.8 mm		38
965.2 mm
Kann CoCollector Front LoaderKann Manufacturing®14001363.5
88.9 mm		2
50.8 mm		38
965.2 mm
Kann One Pass Front LoaderKann Manufacturing®14001033.5
88.9 mm		2
50.8 mm		38
965.2 mm
Leach Front LoaderLeach®306459, 3066354.5
114.3 mm		2.5
63.5 mm		42
1066.8 mm
Leach Front LoaderLeach®306636, 305241, 305240, 3064654.5
114.3 mm		2.5
63.5 mm		44.25
1124 mm
Leach Front LoaderLeach®305112, 305127, 306463, 306464, 3066334.5
114.3 mm		2.5
63.5 mm		42
1066.8 mm
Leach Front LoaderLeach®3066344.5
114.3 mm		2.5
63.5 mm		44.25
1124 mm
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectMcNeilus®0619891, 0619891, 1000069, 1144708 9570.614366, 9570.614380, 9570.6198914.5
114.3 mm		2.5
63.5 mm		46
1168.4 mm
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectMcNeilus®0604120, 9272.604120, 9570.6041205
127 mm		2.5
63.5 mm		44.55
1131.6 mm
McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity DumpMcNeilus®0614366, 0619891, 1000069, 1144708, 9570.614366, 9570.614380, 9570.6198914.5
114.3 mm		2
50.8 mm		46
1168.4 mm
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpMcNeilus®0619877, 9570.6198774
101.6 mm		2.5
63.5 mm		46
1168.4 mm
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpMcNeilus®0614366, 0619891, 1000069,1144708, 9570.614366, 9570.614380, 9570.6198914.5
114.3 mm		2.5
63.5 mm		46
1168.4 mm
McNeilus (MTM) 4080, 4081, 4380 & 4381 PacificMcNeilus®0660777, 1000158, 1145515, 9570.6607774
101.6 mm		2
50.8 mm		46
1168.4 mm
Pak-Mor FPE800 Front LoaderPak-Mor®41490045
127 mm		2
50.8 mm		43.13
1095.5 mm
Wittke Starlight Front LoaderWittke®FLHC-26B, 016-99004
101.6 mm		2
50.8 mm		45.38
1152.7 mm
Wittke Starlight Front LoaderWittke®FLHC-28C, FLHC-26C, 018-99004.5
114.3 mm		2
50.8 mm		45.38
1152.7 mm

Table A reproduces third-party listing values for identification and enquiry purposes only. It is not an HCIC specification and does not imply interchangeability with any listed part.

Non-OEM, Build-to-Order Statement

HCIC cylinders are aftermarket, build-to-order replacement cylinders. They are not original equipment parts, and HCIC is not an authorized distributor of, nor affiliated with, any original equipment manufacturer named on this page. Unless a customer supplies a drawing, sample or nameplate data, HCIC manufactures each cylinder to the drawing prepared by HCIC and approved in writing by the customer before production begins (the "Drawing for Approval" process). Fitness for a particular application depends on operating pressure, duty cycle, mounting geometry, fluid compatibility and vehicle configuration; the buyer is responsible for confirming suitability, and HCIC's responsibility is limited to conformity with the approved drawing and the written warranty supplied with the order.

Table B — HCIC build-to-order parameters

Vehicle modelHCIC Series Model No.TypeDimensions
Dempster, DM2 Front LoaderHCIC-FEL-ARM-0001Single-stage rodTo approved drawing
Dempster, DP80 & XHD Front LoaderHCIC-FEL-ARM-0002Single-stage rodTo approved drawing
Dempster, RFL Residential Front LoaderHCIC-FEL-ARM-0003Single-stage rodTo approved drawing
E-Z Pack FL10, FLOO10 Hercules Front LoaderHCIC-FEL-ARM-0004Single-stage rodTo approved drawing
E-Z Pack FL80, FLOO80 Hercules Front LoaderHCIC-FEL-ARM-0005Single-stage rodTo approved drawing
E-Z Pack, Hercules Residential Front LoaderHCIC-FEL-ARM-0006Single-stage rodTo approved drawing
Heil Front LoaderHCIC-FEL-ARM-0007Single-stage rodTo approved drawing
Heil Half Pack III Front LoaderHCIC-FEL-ARM-0008Single-stage rodTo approved drawing
Kann CoCollector Front LoaderHCIC-FEL-ARM-0009Single-stage rodTo approved drawing
Kann One Pass Front LoaderHCIC-FEL-ARM-0010Single-stage rodTo approved drawing
Leach Front LoaderHCIC-FEL-ARM-0011Single-stage rodTo approved drawing
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectHCIC-FEL-ARM-0012Single-stage rodTo approved drawing
McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity DumpHCIC-FEL-ARM-0013Single-stage rodTo approved drawing
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpHCIC-FEL-ARM-0014Single-stage rodTo approved drawing
McNeilus (MTM) 4080, 4081, 4380 & 4381 PacificHCIC-FEL-ARM-0015Single-stage rodTo approved drawing
Pak-Mor FPE800 Front LoaderHCIC-FEL-ARM-0016Single-stage rodTo approved drawing
Wittke Starlight Front LoaderHCIC-FEL-ARM-0017Single-stage rodTo approved drawing

Table B lists HCIC's own build-to-order series numbers. Every HCIC cylinder is manufactured to the customer-approved drawing, so dimensions are not pre-set from the third-party values in Table A — they are fixed by the approved drawing for each order.

Why Refuse-Fleet Buyers Choose HCIC

Build-to-orderPer approved drawing
Drawing for ApprovalRequired before production
1 pcMOQ
18 moWarranty (written terms)
48 hrQuotation
29Documented configurations
17Compatible models
Design ref.ISO 6020 / 6022

About HCIC

HCIC International Group Co., Limited is a hydraulic cylinder manufacturer based in Jinan, China. Cylinders are designed with reference to ISO 6020, ISO 6022 and ISO 10100, and every build-to-order unit is manufactured only to the drawing approved in writing by the customer (Drawing for Approval), with a minimum order quantity of one piece and an 18-month warranty (written terms apply).

Our Factory

HCIC operates hydraulic-cylinder production facilities with in-house engineering in Jinan, China. In-house production covers tube honing, precision rod grinding and hard-chrome plating, CNC machining of mounts, pins and ports, robotic welding, assembly and pressure testing before dispatch. Multi-stage telescopic cylinders, single-stage rod cylinders and custom engineered units are all built to the drawing approved by the customer, with material and test records kept for every batch.

Ordering, MOQ & Lead Time

MOQ 1 piece

Order a single replacement cylinder. A non-recurring engineering / setup charge may apply to one-off custom builds.

48-hour quotation

Quotation within 48 business hours of receiving complete information (drawing, sample, or nameplate data).

Drawing for Approval

Every build-to-order cylinder starts with a formal HCIC drawing that you approve in writing before production.

18-month warranty

Warranty against defects in materials and workmanship, per the written warranty terms supplied with each order. Request the full warranty terms and exclusions document from HCIC before ordering.

Frequently Asked Questions

Are these front loader original equipment parts?

No. HCIC cylinders are aftermarket, build-to-order replacement cylinders. HCIC is not affiliated with, authorized by, or endorsed by Dempster, E-Z Pack, Heil, Kann Manufacturing, Leach, McNeilus, Pak-Mor, Wittke or any original equipment manufacturer. Each cylinder is manufactured to a drawing approved in writing by the customer before production (the Drawing for Approval process).

Which front loader brands do these arm / lift cylinders fit?

HCIC builds these cylinders to order for the front loader models documented on this page: Dempster, E-Z Pack, Heil, Kann Manufacturing, Leach, McNeilus, Pak-Mor, Wittke. Vehicle names are used for identification only. Send your vehicle model and function position, and HCIC engineers will confirm the configuration and issue a drawing for your written approval.

What is the minimum order quantity for one arm / lift cylinders?

The minimum order quantity is one piece. HCIC supplies these cylinders build-to-order: quotation within 48 business hours of receiving complete information, a drawing approved in writing by the customer before production, and an 18-month warranty per the written warranty terms supplied with each order. A non-recurring engineering / setup charge may apply to one-off custom builds.

Request a Quotation

Tell us the vehicle model, the function position, and attach your nameplate photo or drawing. We reply within 48 business hours.

Trademark & Third-Party Name Notice

Heil®, McNeilus®, Galbreath®, Leach®, E-Z Pack®, Dempster®, Wittke®, Pak-Mor®, Maxon®, Labrie®, Kann®, Accurate Industries™, Benlee™, G & H Manufacturing™, G-S Products™, Automated Waste™ and American Roll-Off™, and all other third-party names, model designations and part numbers on this page are the trademarks, trade names or identifiers of their respective owners. They are used solely to identify the vehicle application or function position for which a build-to-order replacement cylinder may be requested, because no other means of identification is reasonably available. Such use does not imply affiliation with, authorization by, endorsement by, or sponsorship of HCIC or its products by any such owner, and does not imply that any HCIC cylinder is an original equipment part or has been approved, tested or certified by any such owner.

Data Sources

[1] Parker Hannifin Corporation, Mobile Cylinder Division. Telescopic Mobile Cylinders [Z]. Youngstown, OH: Parker Hannifin Corporation, [n.d.], pp. 80–157 (Refuse Body Cylinder Application Guide). Crossover and application data as published: "for reference only; no other conditions are expressed or implied." Extracted 2026-10-16; used for identification and enquiry reference only.