This page was drafted with generative-AI assistance and is pending HCIC engineering and compliance review prior to publication.
HCICHydraulic Cylinders

Front Loaders · Build-to-Order · Aftermarket

Fork / Tilt Cylinders for Front Loaders

Status: aftermarket, build-to-order replacement cylinders — not original equipment parts; manufactured only to the customer-approved drawing (Drawing for Approval).

HCIC builds fork / tilt cylinders to order for front loader bodies — 47 documented configurations across 17 vehicle models from single-stage rod designs, each listed individually in the configuration cards below (Dempster®, E-Z Pack®, Heil®, Kann Manufacturing®, Leach®, McNeilus®, Pak-Mor®, Wittke®). Every unit is engineered to the customer-approved drawing under ISO 6020 / 6022 design practice, with an 18-month warranty and a 48-hour quotation.

Request a QuotationView Brand Fitment
ISO 6020 / 6022 design reference18-Month Warranty (written terms apply)48-Hour QuotationMOQ 1 PieceDrawing for Approval

What This Cylinder Does

On a front loader, this cylinder tilts the forks to empty container contents into the hopper. HCIC manufactures it as a build-to-order ' 'replacement unit: send the vehicle model, the function position, and a nameplate photo, ' 'drawing or sample, and HCIC engineers issue a Drawing for Approval for your written ' 'confirmation before production.

Fig. 1 — Fork / Tilt Cylinders position on a front loader body (reference vehicle: E-Z Pack FL80, FLOO80 Hercules Front Loader)
Fork / Tilt Cylinders position reference on a front loader body (E-Z Pack FL80, FLOO80 Hercules Front Loader) - source application guide figure
Reference figure reproduced from the source third-party application guide for identification of the cylinder function position only. HCIC cylinders are manufactured to the customer-approved drawing, not to this figure.

Brand & Vehicle Fitment

Fork / Tilt Cylinders documented across 17 vehicle models from 8 brands. Third-party names identify the vehicle application only — see the Trademark Notice below.

BrandModelsCompatible vehicle models
Dempster®3Dempster, DM2 Front Loader; Dempster, DP80 & XHD Front Loader; Dempster, RFL Residential Front Loader
E-Z Pack®3E-Z Pack FL10, FLOO10 Hercules Front Loader; E-Z Pack FL80, FLOO80 Hercules Front Loader; E-Z Pack, Hercules Residential Front Loader
Heil®2Heil Front Loader; Heil Half Pack III Front Loader
Kann Manufacturing®2Kann CoCollector Front Loader; Kann One Pass Front Loader
Leach®1Leach Front Loader
McNeilus®4McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full Eject; McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity Dump; McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack Dump; McNeilus (MTM) 4080, 4081, 4380 & 4381 Pacific
Pak-Mor®1Pak-Mor FPE800 Front Loader
Wittke®1Wittke Starlight Front Loader

Fitment entries are compiled from third-party application listings for identification and enquiry purposes only. Fitment does not imply interchangeability with any listed part or authorization by any listed manufacturer.

Documented Configurations by Vehicle Model

Fork / Tilt Cylinders across 17 vehicle models. Each card below lists the documented reference dimensions, OEM reference numbers (identification only) and the HCIC build-to-order model for that vehicle. HCIC cylinders are manufactured only to the customer-approved drawing.

Dempster® Dempster, DM2 Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2 in
50.8 mm		24 in
609.6 mm		DB8651, AB29247HCIC-FEL-FRK-0001

Dempster® Dempster, DP80 & XHD Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2 in
50.8 mm		24 in
609.6 mm		BB8004, BB8169, BB8748-1, AB19869THHCIC-FEL-FRK-0002

Dempster® Dempster, RFL Residential Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		1.5 in
38.1 mm		20 in
508 mm		DB8142, AB29406HCIC-FEL-FRK-0003

E-Z Pack® E-Z Pack FL10, FLOO10 Hercules Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2 in
50.8 mm		24.75 in
628.6 mm		21-03390 K4525DA, 21-09229 K4525ADA 21-15640 C4525BDAHCIC-FEL-FRK-0004
4.5 in
114.3 mm		2 in
50.8 mm		21.75 in
552.4 mm		21-09214 K4522KDA, 21-15774 C4522LOAHCIC-FEL-FRK-0004

E-Z Pack® E-Z Pack FL80, FLOO80 Hercules Front Loader

7 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		1.75 in
44.4 mm		16.5 in
419.1 mm		20-46012 3516BDA, 20-46142 D3516CDA, 20-49952 D3516JDA, 20-49999 D3516KDA, 20-52345 K3516LDAHCIC-FEL-FRK-0005
3.5 in
88.9 mm		1.75 in
44.4 mm		23.5 in
596.9 mm		20-47868 D3523DA, 20-49272 D3523BDA, 20-52346 K3523FDAHCIC-FEL-FRK-0005
4 in
101.6 mm		2 in
50.8 mm		16.5 in
419.1 mm		20-48524 D4016DA, 20-52356 K4016FDAHCIC-FEL-FRK-0005
4 in
101.6 mm		2 in
50.8 mm		21.75 in
552.4 mm		21-09213 K4022BDA, 21-15775 C4022CDAHCIC-FEL-FRK-0005
4 in
101.6 mm		2 in
50.8 mm		24.75 in
628.6 mm		21-03153 K4025JDAHCIC-FEL-FRK-0005
4 in
101.6 mm		2 in
50.8 mm		24.75 in
628.6 mm		21-09228 K4025KDA, 21-15642 C4025RDAHCIC-FEL-FRK-0005
4 in
101.6 mm		2 in
50.8 mm		24.75 in
628.6 mm		21-10044 K4025LDA, 21-14679 C4025PDAHCIC-FEL-FRK-0005

E-Z Pack® E-Z Pack, Hercules Residential Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.75 in
44.4 mm		24.75 in
628.6 mm		21-07434 K3025CDAHCIC-FEL-FRK-0006
4 in
101.6 mm		2 in
50.8 mm		24.75 in
628.6 mm		21-09228 K4025KDA, 21-15642 C4025RDAHCIC-FEL-FRK-0006

Heil® Heil Front Loader

5 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2 in
50.8 mm		25 in
635 mm		1-6369, 1-6669, 1-6777 1-4868HCIC-FEL-FRK-0007
4 in
101.6 mm		2 in
50.8 mm		22 in
558.8 mm		1-6384, 1-6670 1-4903HCIC-FEL-FRK-0007
4 in
101.6 mm		2 in
50.8 mm		19 in
482.6 mm		1-6126, 1-6385, 1-6671HCIC-FEL-FRK-0007
1.5 in
38.1 mm		1 in
25.4 mm		21 in
533.4 mm		1-3798HCIC-FEL-FRK-0007
1.5 in
38.1 mm		1 in
25.4 mm		13.12 in
333.2 mm		1-4876HCIC-FEL-FRK-0007

Heil® Heil Half Pack III Front Loader

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2 in
50.8 mm		25 in
635 mm		1-6369 1-6669, 1-6777 1-4868HCIC-FEL-FRK-0008
4 in
101.6 mm		2 in
50.8 mm		22 in
558.8 mm		1-6670 1-4903, 1-6384HCIC-FEL-FRK-0008
4 in
101.6 mm		2 in
50.8 mm		19 in
482.6 mm		1-6126, 1-6385, 1-6671HCIC-FEL-FRK-0008
1.5 in
38.1 mm		1 in
25.4 mm		—1-4876HCIC-FEL-FRK-0008

Kann Manufacturing® Kann CoCollector Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.75 in
44.4 mm		28 in
711.2 mm		1400101HCIC-FEL-FRK-0009
3 in
76.2 mm		1.75 in
44.4 mm		36 in
914.4 mm		1400102, 3701054HCIC-FEL-FRK-0009

Kann Manufacturing® Kann One Pass Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.75 in
44.4 mm		28 in
711.2 mm		1400101HCIC-FEL-FRK-0010
3 in
76.2 mm		1.75 in
44.4 mm		36 in
914.4 mm		1400102, 3701054HCIC-FEL-FRK-0010

Leach® Leach Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		2 in
50.8 mm		26.75 in
679.4 mm		307534HCIC-FEL-FRK-0011
———601131HCIC-FEL-FRK-0011

McNeilus® McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full Eject

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		2 in
50.8 mm		26 in
660.4 mm		0614333, 1000068, 1144704, 9070.614333, 9570.614333HCIC-FEL-FRK-0012
4 in
101.6 mm		2 in
50.8 mm		26 in
660.4 mm		9272.604121, 9570.604121HCIC-FEL-FRK-0012
3.5 in
88.9 mm		2 in
50.8 mm		26 in
660.4 mm		9570.619980HCIC-FEL-FRK-0012
2 in
50.8 mm		1.25 in
31.8 mm		20 in
508 mm		0617862, 9570.617862HCIC-FEL-FRK-0012

McNeilus® McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity Dump

3 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		2 in
50.8 mm		26 in
660.4 mm		0614333, 1000068, 1144704 9070.614333, 9570.614333HCIC-FEL-FRK-0013
3.5 in
88.9 mm		2 in
50.8 mm		26 in
660.4 mm		9570.619980HCIC-FEL-FRK-0013
2 in
50.8 mm		1.25 in
31.8 mm		20 in
508 mm		0617862, 9570.617862HCIC-FEL-FRK-0013

McNeilus® McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack Dump

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.75 in
44.4 mm		20 in
508 mm		0619876, 9570.619876HCIC-FEL-FRK-0014
3.5 in
88.9 mm		2 in
50.8 mm		26 in
660.4 mm		0614333, 1000068, 1144704, 9070.614333, 9570.614333HCIC-FEL-FRK-0014
3.5 in
88.9 mm		2 in
50.8 mm		26 in
660.4 mm		0618928, 9370.618928, 9570.618928HCIC-FEL-FRK-0014
2 in
50.8 mm		1.25 in
31.8 mm		20 in
508 mm		0617862, 1144705, 9570.617862, 9570.660782HCIC-FEL-FRK-0014

McNeilus® McNeilus (MTM) 4080, 4081, 4380 & 4381 Pacific

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.75 in
44.4 mm		20 in
508 mm		0619876, 9570.619876HCIC-FEL-FRK-0015
3 in
76.2 mm		1.75 in
44.4 mm		20 in
508 mm		0660009, 0660781, 1100028, 9570.660009, 9570.660781HCIC-FEL-FRK-0015
3.5 in
88.9 mm		2 in
50.8 mm		20 in
508 mm		0660011, 9570.660011HCIC-FEL-FRK-0015
2 in
50.8 mm		1.25 in
31.8 mm		20 in
508 mm		0617862, 1144705, 9570.617862, 9570.660782HCIC-FEL-FRK-0015

Pak-Mor® Pak-Mor FPE800 Front Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2 in
50.8 mm		28 in
711.2 mm		4149071HCIC-FEL-FRK-0016

Wittke® Wittke Starlight Front Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3.5 in
88.9 mm		1.75 in
44.4 mm		19 in
482.6 mm		FLHC-27, 014-9900HCIC-FEL-FRK-0017
2 in
50.8 mm		1 in
25.4 mm		13.75 in
349.2 mm		FLHC-37, 008-9818HCIC-FEL-FRK-0017

Reference Dimensions & HCIC Build-to-Order Parameters

47 documented configurations for fork / tilt cylinders on front loader bodies (source application guide pp. 80–157). Third-party reference data and HCIC build-to-order parameters are shown in two physically separate tables.

Reference Data Disclaimer

The dimensional information in the table below is compiled from publicly available third-party refuse-body cylinder application and crossover listings, and is reproduced for identification and enquiry purposes only. The original publisher states that such crossover and application data is "for reference only, and no other conditions are expressed or implied." HCIC does not warrant the accuracy or completeness of third-party reference data and does not represent it as HCIC's own measured specification. Bore, rod and stroke figures are indicative values only; final manufacturing dimensions, tolerances, materials, seal configurations, pressure ratings and port/mounting interfaces are determined solely by the drawing approved by the customer for each order.

Table A — Third-party reference data (for identification only)

Vehicle modelBrandOEM ref. part numbers
(identification only)		Bore
in / mm		Rod
in / mm		Stroke
in / mm
Dempster, DM2 Front LoaderDempster®DB8651, AB292474
101.6 mm		2
50.8 mm		24
609.6 mm
Dempster, DP80 & XHD Front LoaderDempster®BB8004, BB8169, BB8748-1, AB19869TH4
101.6 mm		2
50.8 mm		24
609.6 mm
Dempster, RFL Residential Front LoaderDempster®DB8142, AB294063.5
88.9 mm		1.5
38.1 mm		20
508 mm
E-Z Pack FL10, FLOO10 Hercules Front LoaderE-Z Pack®21-03390 K4525DA, 21-09229 K4525ADA 21-15640 C4525BDA4.5
114.3 mm		2
50.8 mm		24.75
628.6 mm
E-Z Pack FL10, FLOO10 Hercules Front LoaderE-Z Pack®21-09214 K4522KDA, 21-15774 C4522LOA4.5
114.3 mm		2
50.8 mm		21.75
552.4 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®20-46012 3516BDA, 20-46142 D3516CDA, 20-49952 D3516JDA, 20-49999 D3516KDA, 20-52345 K3516LDA3.5
88.9 mm		1.75
44.4 mm		16.5
419.1 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®20-47868 D3523DA, 20-49272 D3523BDA, 20-52346 K3523FDA3.5
88.9 mm		1.75
44.4 mm		23.5
596.9 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®20-48524 D4016DA, 20-52356 K4016FDA4
101.6 mm		2
50.8 mm		16.5
419.1 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®21-09213 K4022BDA, 21-15775 C4022CDA4
101.6 mm		2
50.8 mm		21.75
552.4 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®21-03153 K4025JDA4
101.6 mm		2
50.8 mm		24.75
628.6 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®21-09228 K4025KDA, 21-15642 C4025RDA4
101.6 mm		2
50.8 mm		24.75
628.6 mm
E-Z Pack FL80, FLOO80 Hercules Front LoaderE-Z Pack®21-10044 K4025LDA, 21-14679 C4025PDA4
101.6 mm		2
50.8 mm		24.75
628.6 mm
E-Z Pack, Hercules Residential Front LoaderE-Z Pack®21-07434 K3025CDA3
76.2 mm		1.75
44.4 mm		24.75
628.6 mm
E-Z Pack, Hercules Residential Front LoaderE-Z Pack®21-09228 K4025KDA, 21-15642 C4025RDA4
101.6 mm		2
50.8 mm		24.75
628.6 mm
Heil Front LoaderHeil®1-6369, 1-6669, 1-6777 1-48684
101.6 mm		2
50.8 mm		25
635 mm
Heil Front LoaderHeil®1-6384, 1-6670 1-49034
101.6 mm		2
50.8 mm		22
558.8 mm
Heil Front LoaderHeil®1-6126, 1-6385, 1-66714
101.6 mm		2
50.8 mm		19
482.6 mm
Heil Front LoaderHeil®1-37981.5
38.1 mm		1
25.4 mm		21
533.4 mm
Heil Front LoaderHeil®1-48761.5
38.1 mm		1
25.4 mm		13.12
333.2 mm
Heil Half Pack III Front LoaderHeil®1-6369 1-6669, 1-6777 1-48684
101.6 mm		2
50.8 mm		25
635 mm
Heil Half Pack III Front LoaderHeil®1-6670 1-4903, 1-63844
101.6 mm		2
50.8 mm		22
558.8 mm
Heil Half Pack III Front LoaderHeil®1-6126, 1-6385, 1-66714
101.6 mm		2
50.8 mm		19
482.6 mm
Heil Half Pack III Front LoaderHeil®1-48761.5
38.1 mm		1
25.4 mm		—
Kann CoCollector Front LoaderKann Manufacturing®14001013
76.2 mm		1.75
44.4 mm		28
711.2 mm
Kann CoCollector Front LoaderKann Manufacturing®1400102, 37010543
76.2 mm		1.75
44.4 mm		36
914.4 mm
Kann One Pass Front LoaderKann Manufacturing®14001013
76.2 mm		1.75
44.4 mm		28
711.2 mm
Kann One Pass Front LoaderKann Manufacturing®1400102, 37010543
76.2 mm		1.75
44.4 mm		36
914.4 mm
Leach Front LoaderLeach®3075343.5
88.9 mm		2
50.8 mm		26.75
679.4 mm
Leach Front LoaderLeach®601131———
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectMcNeilus®0614333, 1000068, 1144704, 9070.614333, 9570.6143333.5
88.9 mm		2
50.8 mm		26
660.4 mm
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectMcNeilus®9272.604121, 9570.6041214
101.6 mm		2
50.8 mm		26
660.4 mm
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectMcNeilus®9570.6199803.5
88.9 mm		2
50.8 mm		26
660.4 mm
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectMcNeilus®0617862, 9570.6178622
50.8 mm		1.25
31.8 mm		20
508 mm
McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity DumpMcNeilus®0614333, 1000068, 1144704 9070.614333, 9570.6143333.5
88.9 mm		2
50.8 mm		26
660.4 mm
McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity DumpMcNeilus®9570.6199803.5
88.9 mm		2
50.8 mm		26
660.4 mm
McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity DumpMcNeilus®0617862, 9570.6178622
50.8 mm		1.25
31.8 mm		20
508 mm
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpMcNeilus®0619876, 9570.6198763
76.2 mm		1.75
44.4 mm		20
508 mm
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpMcNeilus®0614333, 1000068, 1144704, 9070.614333, 9570.6143333.5
88.9 mm		2
50.8 mm		26
660.4 mm
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpMcNeilus®0618928, 9370.618928, 9570.6189283.5
88.9 mm		2
50.8 mm		26
660.4 mm
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpMcNeilus®0617862, 1144705, 9570.617862, 9570.6607822
50.8 mm		1.25
31.8 mm		20
508 mm
McNeilus (MTM) 4080, 4081, 4380 & 4381 PacificMcNeilus®0619876, 9570.6198763
76.2 mm		1.75
44.4 mm		20
508 mm
McNeilus (MTM) 4080, 4081, 4380 & 4381 PacificMcNeilus®0660009, 0660781, 1100028, 9570.660009, 9570.6607813
76.2 mm		1.75
44.4 mm		20
508 mm
McNeilus (MTM) 4080, 4081, 4380 & 4381 PacificMcNeilus®0660011, 9570.6600113.5
88.9 mm		2
50.8 mm		20
508 mm
McNeilus (MTM) 4080, 4081, 4380 & 4381 PacificMcNeilus®0617862, 1144705, 9570.617862, 9570.6607822
50.8 mm		1.25
31.8 mm		20
508 mm
Pak-Mor FPE800 Front LoaderPak-Mor®41490714
101.6 mm		2
50.8 mm		28
711.2 mm
Wittke Starlight Front LoaderWittke®FLHC-27, 014-99003.5
88.9 mm		1.75
44.4 mm		19
482.6 mm
Wittke Starlight Front LoaderWittke®FLHC-37, 008-98182
50.8 mm		1
25.4 mm		13.75
349.2 mm

Table A reproduces third-party listing values for identification and enquiry purposes only. It is not an HCIC specification and does not imply interchangeability with any listed part.

Non-OEM, Build-to-Order Statement

HCIC cylinders are aftermarket, build-to-order replacement cylinders. They are not original equipment parts, and HCIC is not an authorized distributor of, nor affiliated with, any original equipment manufacturer named on this page. Unless a customer supplies a drawing, sample or nameplate data, HCIC manufactures each cylinder to the drawing prepared by HCIC and approved in writing by the customer before production begins (the "Drawing for Approval" process). Fitness for a particular application depends on operating pressure, duty cycle, mounting geometry, fluid compatibility and vehicle configuration; the buyer is responsible for confirming suitability, and HCIC's responsibility is limited to conformity with the approved drawing and the written warranty supplied with the order.

Table B — HCIC build-to-order parameters

Vehicle modelHCIC Series Model No.TypeDimensions
Dempster, DM2 Front LoaderHCIC-FEL-FRK-0001Single-stage rodTo approved drawing
Dempster, DP80 & XHD Front LoaderHCIC-FEL-FRK-0002Single-stage rodTo approved drawing
Dempster, RFL Residential Front LoaderHCIC-FEL-FRK-0003Single-stage rodTo approved drawing
E-Z Pack FL10, FLOO10 Hercules Front LoaderHCIC-FEL-FRK-0004Single-stage rodTo approved drawing
E-Z Pack FL80, FLOO80 Hercules Front LoaderHCIC-FEL-FRK-0005Single-stage rodTo approved drawing
E-Z Pack, Hercules Residential Front LoaderHCIC-FEL-FRK-0006Single-stage rodTo approved drawing
Heil Front LoaderHCIC-FEL-FRK-0007Single-stage rodTo approved drawing
Heil Half Pack III Front LoaderHCIC-FEL-FRK-0008Single-stage rodTo approved drawing
Kann CoCollector Front LoaderHCIC-FEL-FRK-0009Single-stage rodTo approved drawing
Kann One Pass Front LoaderHCIC-FEL-FRK-0010Single-stage rodTo approved drawing
Leach Front LoaderHCIC-FEL-FRK-0011Single-stage rodTo approved drawing
McNeilus (MTM) 3604, 4004, 4304, 4504, 4020, 4320 & 4520 Full EjectHCIC-FEL-FRK-0012Single-stage rodTo approved drawing
McNeilus (MTM) 3624, 4024, 4324 & 4524 Atlantic Gravity DumpHCIC-FEL-FRK-0013Single-stage rodTo approved drawing
McNeilus (MTM) 4028, 4328 Lightweight Century Half Pack DumpHCIC-FEL-FRK-0014Single-stage rodTo approved drawing
McNeilus (MTM) 4080, 4081, 4380 & 4381 PacificHCIC-FEL-FRK-0015Single-stage rodTo approved drawing
Pak-Mor FPE800 Front LoaderHCIC-FEL-FRK-0016Single-stage rodTo approved drawing
Wittke Starlight Front LoaderHCIC-FEL-FRK-0017Single-stage rodTo approved drawing

Table B lists HCIC's own build-to-order series numbers. Every HCIC cylinder is manufactured to the customer-approved drawing, so dimensions are not pre-set from the third-party values in Table A — they are fixed by the approved drawing for each order.

Why Refuse-Fleet Buyers Choose HCIC

Build-to-orderPer approved drawing
Drawing for ApprovalRequired before production
1 pcMOQ
18 moWarranty (written terms)
48 hrQuotation
47Documented configurations
17Compatible models
Design ref.ISO 6020 / 6022

About HCIC

HCIC International Group Co., Limited is a hydraulic cylinder manufacturer based in Jinan, China. Cylinders are designed with reference to ISO 6020, ISO 6022 and ISO 10100, and every build-to-order unit is manufactured only to the drawing approved in writing by the customer (Drawing for Approval), with a minimum order quantity of one piece and an 18-month warranty (written terms apply).

Our Factory

HCIC operates hydraulic-cylinder production facilities with in-house engineering in Jinan, China. In-house production covers tube honing, precision rod grinding and hard-chrome plating, CNC machining of mounts, pins and ports, robotic welding, assembly and pressure testing before dispatch. Multi-stage telescopic cylinders, single-stage rod cylinders and custom engineered units are all built to the drawing approved by the customer, with material and test records kept for every batch.

Ordering, MOQ & Lead Time

MOQ 1 piece

Order a single replacement cylinder. A non-recurring engineering / setup charge may apply to one-off custom builds.

48-hour quotation

Quotation within 48 business hours of receiving complete information (drawing, sample, or nameplate data).

Drawing for Approval

Every build-to-order cylinder starts with a formal HCIC drawing that you approve in writing before production.

18-month warranty

Warranty against defects in materials and workmanship, per the written warranty terms supplied with each order. Request the full warranty terms and exclusions document from HCIC before ordering.

Frequently Asked Questions

Are these front loader original equipment parts?

No. HCIC cylinders are aftermarket, build-to-order replacement cylinders. HCIC is not affiliated with, authorized by, or endorsed by Dempster, E-Z Pack, Heil, Kann Manufacturing, Leach, McNeilus, Pak-Mor, Wittke or any original equipment manufacturer. Each cylinder is manufactured to a drawing approved in writing by the customer before production (the Drawing for Approval process).

Which front loader brands do these fork / tilt cylinders fit?

HCIC builds these cylinders to order for the front loader models documented on this page: Dempster, E-Z Pack, Heil, Kann Manufacturing, Leach, McNeilus, Pak-Mor, Wittke. Vehicle names are used for identification only. Send your vehicle model and function position, and HCIC engineers will confirm the configuration and issue a drawing for your written approval.

What is the minimum order quantity for one fork / tilt cylinders?

The minimum order quantity is one piece. HCIC supplies these cylinders build-to-order: quotation within 48 business hours of receiving complete information, a drawing approved in writing by the customer before production, and an 18-month warranty per the written warranty terms supplied with each order. A non-recurring engineering / setup charge may apply to one-off custom builds.

Request a Quotation

Tell us the vehicle model, the function position, and attach your nameplate photo or drawing. We reply within 48 business hours.

Trademark & Third-Party Name Notice

Heil®, McNeilus®, Galbreath®, Leach®, E-Z Pack®, Dempster®, Wittke®, Pak-Mor®, Maxon®, Labrie®, Kann®, Accurate Industries™, Benlee™, G & H Manufacturing™, G-S Products™, Automated Waste™ and American Roll-Off™, and all other third-party names, model designations and part numbers on this page are the trademarks, trade names or identifiers of their respective owners. They are used solely to identify the vehicle application or function position for which a build-to-order replacement cylinder may be requested, because no other means of identification is reasonably available. Such use does not imply affiliation with, authorization by, endorsement by, or sponsorship of HCIC or its products by any such owner, and does not imply that any HCIC cylinder is an original equipment part or has been approved, tested or certified by any such owner.

Data Sources

[1] Parker Hannifin Corporation, Mobile Cylinder Division. Telescopic Mobile Cylinders [Z]. Youngstown, OH: Parker Hannifin Corporation, [n.d.], pp. 80–157 (Refuse Body Cylinder Application Guide). Crossover and application data as published: "for reference only; no other conditions are expressed or implied." Extracted 2026-10-16; used for identification and enquiry reference only.