Roll-Offs · Build-to-Order · Aftermarket
Status: aftermarket, build-to-order replacement cylinders — not original equipment parts; manufactured only to the customer-approved drawing (Drawing for Approval).
HCIC builds stabilizer / jack-leg cylinders to order for roll-off bodies — 5 documented configurations across 5 vehicle models from single-stage rod designs, each listed individually in the configuration cards below (Accurate Industries™, Automated Waste™, Dempster®, Galbreath®). Every unit is engineered to the customer-approved drawing under ISO 6020 / 6022 design practice, with an 18-month warranty and a 48-hour quotation.
On a roll-off, this cylinder deploys the stabilizer / jack leg to steady the vehicle. HCIC manufactures it as a build-to-order ' 'replacement unit: send the vehicle model, the function position, and a nameplate photo, ' 'drawing or sample, and HCIC engineers issue a Drawing for Approval for your written ' 'confirmation before production.
Stabilizer / Jack-Leg Cylinders documented across 5 vehicle models from 4 brands. Third-party names identify the vehicle application only — see the Trademark Notice below.
| Brand | Models | Compatible vehicle models |
|---|---|---|
| Accurate Industries™ | 1 | Accurate Industries AH-AB-60 Bail Hook Roll-Off |
| Automated Waste™ | 1 | Automated Waste / American Roll-Off |
| Dempster® | 2 | Dempster, Dinosaur Roll-Off; Dempster, Dragon Roll -Off |
| Galbreath® | 1 | Galbreath Hook Lift Roll-Off |
Fitment entries are compiled from third-party application listings for identification and enquiry purposes only. Fitment does not imply interchangeability with any listed part or authorization by any listed manufacturer.
Stabilizer / Jack-Leg Cylinders across 5 vehicle models. Each card below lists the documented reference dimensions, OEM reference numbers (identification only) and the HCIC build-to-order model for that vehicle. HCIC cylinders are manufactured only to the customer-approved drawing.
1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.
| Bore in / mm | Rod in / mm | Stroke in / mm | OEM ref. (identification only) | HCIC model |
|---|---|---|---|---|
| 5.25 in 133.3 mm | 2.5 in 63.5 mm | 6.88 in 174.8 mm | A-19, HP-HH007 | HCIC-RRO-STB-0001 |
1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.
| Bore in / mm | Rod in / mm | Stroke in / mm | OEM ref. (identification only) | HCIC model |
|---|---|---|---|---|
| 5.5 in 139.7 mm | 2 in 50.8 mm | 8 in 203.2 mm | 110-600 | HCIC-RRO-STB-0002 |
1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.
| Bore in / mm | Rod in / mm | Stroke in / mm | OEM ref. (identification only) | HCIC model |
|---|---|---|---|---|
| 5.25 in 133.3 mm | 2.5 in 63.5 mm | 6.88 in 174.8 mm | BB8181, DB7699 | HCIC-RRO-STB-0003 |
1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.
| Bore in / mm | Rod in / mm | Stroke in / mm | OEM ref. (identification only) | HCIC model |
|---|---|---|---|---|
| 6 in 152.4 mm | 3 in 76.2 mm | 7.75 in 196.8 mm | AB19462, AB19467 | HCIC-RRO-STB-0004 |
1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.
| Bore in / mm | Rod in / mm | Stroke in / mm | OEM ref. (identification only) | HCIC model |
|---|---|---|---|---|
| 6 in 152.4 mm | 3 in 76.2 mm | 4.81 in 122.2 mm | 3091, 3106, 7392, 9500, 9872 A1891, A3115 | HCIC-RRO-STB-0005 |
5 documented configurations for stabilizer / jack-leg cylinders on roll-off bodies (source application guide pp. 80–157). Third-party reference data and HCIC build-to-order parameters are shown in two physically separate tables.
The dimensional information in the table below is compiled from publicly available third-party refuse-body cylinder application and crossover listings, and is reproduced for identification and enquiry purposes only. The original publisher states that such crossover and application data is "for reference only, and no other conditions are expressed or implied." HCIC does not warrant the accuracy or completeness of third-party reference data and does not represent it as HCIC's own measured specification. Bore, rod and stroke figures are indicative values only; final manufacturing dimensions, tolerances, materials, seal configurations, pressure ratings and port/mounting interfaces are determined solely by the drawing approved by the customer for each order.
| Vehicle model | Brand | OEM ref. part numbers (identification only) | Bore in / mm | Rod in / mm | Stroke in / mm |
|---|---|---|---|---|---|
| Accurate Industries AH-AB-60 Bail Hook Roll-Off | Accurate Industries™ | A-19, HP-HH007 | 5.25 133.3 mm | 2.5 63.5 mm | 6.88 174.8 mm |
| Automated Waste / American Roll-Off | Automated Waste™ | 110-600 | 5.5 139.7 mm | 2 50.8 mm | 8 203.2 mm |
| Dempster, Dinosaur Roll-Off | Dempster® | BB8181, DB7699 | 5.25 133.3 mm | 2.5 63.5 mm | 6.88 174.8 mm |
| Dempster, Dragon Roll -Off | Dempster® | AB19462, AB19467 | 6 152.4 mm | 3 76.2 mm | 7.75 196.8 mm |
| Galbreath Hook Lift Roll-Off | Galbreath® | 3091, 3106, 7392, 9500, 9872 A1891, A3115 | 6 152.4 mm | 3 76.2 mm | 4.81 122.2 mm |
Table A reproduces third-party listing values for identification and enquiry purposes only. It is not an HCIC specification and does not imply interchangeability with any listed part.
HCIC cylinders are aftermarket, build-to-order replacement cylinders. They are not original equipment parts, and HCIC is not an authorized distributor of, nor affiliated with, any original equipment manufacturer named on this page. Unless a customer supplies a drawing, sample or nameplate data, HCIC manufactures each cylinder to the drawing prepared by HCIC and approved in writing by the customer before production begins (the "Drawing for Approval" process). Fitness for a particular application depends on operating pressure, duty cycle, mounting geometry, fluid compatibility and vehicle configuration; the buyer is responsible for confirming suitability, and HCIC's responsibility is limited to conformity with the approved drawing and the written warranty supplied with the order.
| Vehicle model | HCIC Series Model No. | Type | Dimensions |
|---|---|---|---|
| Accurate Industries AH-AB-60 Bail Hook Roll-Off | HCIC-RRO-STB-0001 | Single-stage rod | To approved drawing |
| Automated Waste / American Roll-Off | HCIC-RRO-STB-0002 | Single-stage rod | To approved drawing |
| Dempster, Dinosaur Roll-Off | HCIC-RRO-STB-0003 | Single-stage rod | To approved drawing |
| Dempster, Dragon Roll -Off | HCIC-RRO-STB-0004 | Single-stage rod | To approved drawing |
| Galbreath Hook Lift Roll-Off | HCIC-RRO-STB-0005 | Single-stage rod | To approved drawing |
Table B lists HCIC's own build-to-order series numbers. Every HCIC cylinder is manufactured to the customer-approved drawing, so dimensions are not pre-set from the third-party values in Table A — they are fixed by the approved drawing for each order.
HCIC International Group Co., Limited is a hydraulic cylinder manufacturer based in Jinan, China. Cylinders are designed with reference to ISO 6020, ISO 6022 and ISO 10100, and every build-to-order unit is manufactured only to the drawing approved in writing by the customer (Drawing for Approval), with a minimum order quantity of one piece and an 18-month warranty (written terms apply).
HCIC operates hydraulic-cylinder production facilities with in-house engineering in Jinan, China. In-house production covers tube honing, precision rod grinding and hard-chrome plating, CNC machining of mounts, pins and ports, robotic welding, assembly and pressure testing before dispatch. Multi-stage telescopic cylinders, single-stage rod cylinders and custom engineered units are all built to the drawing approved by the customer, with material and test records kept for every batch.
Order a single replacement cylinder. A non-recurring engineering / setup charge may apply to one-off custom builds.
Quotation within 48 business hours of receiving complete information (drawing, sample, or nameplate data).
Every build-to-order cylinder starts with a formal HCIC drawing that you approve in writing before production.
Warranty against defects in materials and workmanship, per the written warranty terms supplied with each order. Request the full warranty terms and exclusions document from HCIC before ordering.
No. HCIC cylinders are aftermarket, build-to-order replacement cylinders. HCIC is not affiliated with, authorized by, or endorsed by Accurate Industries, Automated Waste, Dempster, Galbreath or any original equipment manufacturer. Each cylinder is manufactured to a drawing approved in writing by the customer before production (the Drawing for Approval process).
HCIC builds these cylinders to order for the roll-off models documented on this page: Accurate Industries, Automated Waste, Dempster, Galbreath. Vehicle names are used for identification only. Send your vehicle model and function position, and HCIC engineers will confirm the configuration and issue a drawing for your written approval.
The minimum order quantity is one piece. HCIC supplies these cylinders build-to-order: quotation within 48 business hours of receiving complete information, a drawing approved in writing by the customer before production, and an 18-month warranty per the written warranty terms supplied with each order. A non-recurring engineering / setup charge may apply to one-off custom builds.
Tell us the vehicle model, the function position, and attach your nameplate photo or drawing. We reply within 48 business hours.
Heil®, McNeilus®, Galbreath®, Leach®, E-Z Pack®, Dempster®, Wittke®, Pak-Mor®, Maxon®, Labrie®, Kann®, Accurate Industries™, Benlee™, G & H Manufacturing™, G-S Products™, Automated Waste™ and American Roll-Off™, and all other third-party names, model designations and part numbers on this page are the trademarks, trade names or identifiers of their respective owners. They are used solely to identify the vehicle application or function position for which a build-to-order replacement cylinder may be requested, because no other means of identification is reasonably available. Such use does not imply affiliation with, authorization by, endorsement by, or sponsorship of HCIC or its products by any such owner, and does not imply that any HCIC cylinder is an original equipment part or has been approved, tested or certified by any such owner.
[1] Parker Hannifin Corporation, Mobile Cylinder Division. Telescopic Mobile Cylinders [Z]. Youngstown, OH: Parker Hannifin Corporation, [n.d.], pp. 80–157 (Refuse Body Cylinder Application Guide). Crossover and application data as published: "for reference only; no other conditions are expressed or implied." Extracted 2026-10-16; used for identification and enquiry reference only.