This page was drafted with generative-AI assistance and is pending HCIC engineering and compliance review prior to publication.
HCICHydraulic Cylinders

Rear Loaders · Build-to-Order · Aftermarket

Packer Blade Cylinders for Rear Loaders

Status: aftermarket, build-to-order replacement cylinders — not original equipment parts; manufactured only to the customer-approved drawing (Drawing for Approval).

HCIC builds packer blade cylinders to order for rear loader bodies — 50 documented configurations across 16 vehicle models from single-stage rod designs, each listed individually in the configuration cards below (Dempster®, E-Z Pack®, G & H Manufacturing™, Heil®, Leach®, McNeilus®, Pak-Mor®). Every unit is engineered to the customer-approved drawing under ISO 6020 / 6022 design practice, with an 18-month warranty and a 48-hour quotation.

Request a QuotationView Brand Fitment
ISO 6020 / 6022 design reference18-Month Warranty (written terms apply)48-Hour QuotationMOQ 1 PieceDrawing for Approval

What This Cylinder Does

On a rear loader, this cylinder drives the packer blade to compact refuse toward the rear of the body. HCIC manufactures it as a build-to-order ' 'replacement unit: send the vehicle model, the function position, and a nameplate photo, ' 'drawing or sample, and HCIC engineers issue a Drawing for Approval for your written ' 'confirmation before production.

Fig. 1 — Packer Blade Cylinders position on a rear loader body (reference vehicle: Leach Alpha, Beta & Delta Rear Loader)
Packer Blade Cylinders position reference on a rear loader body (Leach Alpha, Beta & Delta Rear Loader) - source application guide figure
Reference figure reproduced from the source third-party application guide for identification of the cylinder function position only. HCIC cylinders are manufactured to the customer-approved drawing, not to this figure.

Brand & Vehicle Fitment

Packer Blade Cylinders documented across 16 vehicle models from 7 brands. Third-party names identify the vehicle application only — see the Trademark Notice below.

BrandModelsCompatible vehicle models
Dempster®1Dempster, Routeking II Rear Loader
E-Z Pack®4E-Z Pack, Apollo Rear Loader; E-Z Pack, C200 & M150 Rear Loader; E-Z Pack, Goliath II Rear Loader; E-Z Pack, Goliath Rear Loader
G & H Manufacturing™1G & H Manufacturing R-90 Recycling Rear Loader
Heil®3Heil Big Bite Rear Loader; Heil Formula 4000 Rear Loader; Heil Formula 5000 Rear Loader
Leach®2Leach 2RII Rear Loader; Leach Alpha, Beta & Delta Rear Loader
McNeilus®4McNeilus (MTM) Standard & Heavy Duty Rear Loader; McNeilus (MTM) XC High Compaction Rear Loader; McNeilus Metro Rear Loader; McNeilus Tag Axle Rear Loader
Pak-Mor®1Pak-Mor Rear Loader

Fitment entries are compiled from third-party application listings for identification and enquiry purposes only. Fitment does not imply interchangeability with any listed part or authorization by any listed manufacturer.

Documented Configurations by Vehicle Model

Packer Blade Cylinders across 16 vehicle models. Each card below lists the documented reference dimensions, OEM reference numbers (identification only) and the HCIC build-to-order model for that vehicle. HCIC cylinders are manufactured only to the customer-approved drawing.

Dempster® Dempster, Routeking II Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6 in
152.4 mm		2.5 in
63.5 mm		34 in
863.6 mm		AB19600TH, AB26635TH, BB6997, BB8112, BB8133-1, DB8043HCIC-REL-PCK-0001
5 in
127 mm		3 in
76.2 mm		27 in
685.8 mm		AB19601TH, BB6996, BB8134-1, BB8235, DB8042HCIC-REL-PCK-0001

E-Z Pack® E-Z Pack, Apollo Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2 in
50.8 mm		38.31 in
973.1 mm		21-01648 K4538FDA, 21-14653 C4538DDAHCIC-REL-PCK-0002
4 in
101.6 mm		2.5 in
63.5 mm		24.81 in
630.2 mm		21-01883 K4025FDA, 20-49775 D4025ADA, 21-14634 C4025MDAHCIC-REL-PCK-0002

E-Z Pack® E-Z Pack, C200 & M150 Rear Loader

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		1.75 in
44.4 mm		30.38 in
771.7 mm		21-03472 K4030LDAHCIC-REL-PCK-0003
3 in
76.2 mm		1.75 in
44.4 mm		21.13 in
536.7 mm		21-01630 K3021LDAHCIC-REL-PCK-0003
3.5 in
88.9 mm		1.75 in
44.4 mm		26.31 in
668.3 mm		21-03471 K3526NDAHCIC-REL-PCK-0003
3 in
76.2 mm		1.75 in
44.4 mm		18 in
457.2 mm		21-01634 K3018GDA, 21-14675 C3018HDAHCIC-REL-PCK-0003

E-Z Pack® E-Z Pack, Goliath II Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5.5 in
139.7 mm		2.5 in
63.5 mm		38.31 in
973.1 mm		21-01954 K5538CDA, 20-49774 D5538ADA, 21-14635 C5538DDAHCIC-REL-PCK-0004
4 in
101.6 mm		2.5 in
63.5 mm		24.81 in
630.2 mm		21-01883 K4025FDA, 20-49775 D4025ADA, 21-14634 C4025MDAHCIC-REL-PCK-0004

E-Z Pack® E-Z Pack, Goliath Rear Loader

3 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6 in
152.4 mm		2.75 in
69.8 mm		42.63 in
1082.8 mm		20-44095 6042DA, 20-44973 6042ADA, 20-46077 D6042BDA, 20-47092 D6042CDAHCIC-REL-PCK-0005
4 in
101.6 mm		2.75 in
69.8 mm		28.5 in
723.9 mm		20-43726 4028DA, 20-44969 4028BDA, 20-46076 D4028DDA, 20-46382 D4028EDA, 20-47091 D4028FDA, 20-49897 D4028KDA, 21-01531 K4028LDA, 21-14658 C4028MDAHCIC-REL-PCK-0005
4 in
101.6 mm		2.75 in
69.8 mm		25.62 in
650.7 mm		21-02610 K4025GDA, 21-14661 C4025NDAHCIC-REL-PCK-0005

G & H Manufacturing™ G & H Manufacturing R-90 Recycling Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		2 in
50.8 mm		30 in
762 mm		A2610, H1234, PH-020-803HCIC-REL-PCK-0006
4.5 in
114.3 mm		2.5 in
63.5 mm		16.75 in
425.4 mm		A4456, H1238HCIC-REL-PCK-0006

Heil® Heil Big Bite Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5.5 in
139.7 mm		4 in
101.6 mm		35.88 in
911.4 mm		1-6456HCIC-REL-PCK-0007
5.5 in
139.7 mm		3.5 in
88.9 mm		24 in
609.6 mm		1-6457HCIC-REL-PCK-0007

Heil® Heil Formula 4000 Rear Loader

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4 in
101.6 mm		2.5 in
63.5 mm		21.63 in
549.4 mm		1-4108, 1-4334HCIC-REL-PCK-0008
3.5 in
88.9 mm		2.25 in
57.1 mm		21.63 in
549.4 mm		1-2931, 1-3672, 1-3856, 1-3902, 1-4017, 1-4100HCIC-REL-PCK-0008
4.5 in
114.3 mm		2 in
50.8 mm		26.5 in
673.1 mm		1-4081, 1-4110HCIC-REL-PCK-0008
4.5 in
114.3 mm		2 in
50.8 mm		26.94 in
684.3 mm		1-2928, 1-3635, 1-3809, 1-3921, 1-4018, 1-4101HCIC-REL-PCK-0008

Heil® Heil Formula 5000 Rear Loader

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		2.5 in
63.5 mm		36 in
914.4 mm		1-4824, 1-4828, 1-4884, 1-5110, 1-6610HCIC-REL-PCK-0009
5 in
127 mm		2.5 in
63.5 mm		36 in
914.4 mm		1-4093HCIC-REL-PCK-0009
5.5 in
139.7 mm		3.5 in
88.9 mm		24.25 in
615.9 mm		1-4347, 1-4887, 1-5111, 1-6611HCIC-REL-PCK-0009
5 in
127 mm		3 in
76.2 mm		20 in
508 mm		1-4094HCIC-REL-PCK-0009

Leach® Leach 2RII Rear Loader

5 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6 in
152.4 mm		4.5 in
114.3 mm		30.25 in
768.3 mm		2R1006A, 304805HCIC-REL-PCK-0010
6 in
152.4 mm		4.5 in
114.3 mm		30.25 in
768.3 mm		2R1008R, 32046, 300679, 300900, 300990, 303904, 305827, 306562HCIC-REL-PCK-0010
6 in
152.4 mm		4.5 in
114.3 mm		30.25 in
768.3 mm		304168, 307081, 620568HCIC-REL-PCK-0010
6 in
152.4 mm		4.5 in
114.3 mm		30.25 in
768.3 mm		700081, 717488HCIC-REL-PCK-0010
6 in
152.4 mm		4.5 in
114.3 mm		27.81 in
706.4 mm		307082, 620509, 700289HCIC-REL-PCK-0010

Leach® Leach Alpha, Beta & Delta Rear Loader

6 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2.5 in
63.5 mm		32.5 in
825.5 mm		210658HCIC-REL-PCK-0011
5 in
127 mm		3.5 in
88.9 mm		32.5 in
825.5 mm		404411, 406578HCIC-REL-PCK-0011
———601366HCIC-REL-PCK-0011
5.5 in
139.7 mm		2.5 in
63.5 mm		37 in
939.8 mm		210659HCIC-REL-PCK-0011
6 in
152.4 mm		——401965, 402735, 406577HCIC-REL-PCK-0011
———210628HCIC-REL-PCK-0011

McNeilus® McNeilus (MTM) Standard & Heavy Duty Rear Loader

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		3.5 in
88.9 mm		32.5 in
825.5 mm		0604144, 1109366, 9470.604144HCIC-REL-PCK-0012
5 in
127 mm		4 in
101.6 mm		32.5 in
825.5 mm		0604146, 1108291, 9470.604146HCIC-REL-PCK-0012
4 in
101.6 mm		3 in
76.2 mm		23 in
584.2 mm		0604143, 1109367, 9470.604143HCIC-REL-PCK-0012
4.5 in
114.3 mm		3.5 in
88.9 mm		23 in
584.2 mm		0604145, 1108292, 9470.604145HCIC-REL-PCK-0012

McNeilus® McNeilus (MTM) XC High Compaction Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5.5 in
139.7 mm		4.5 in
114.3 mm		38.62 in
980.9 mm		0604135, 1108286, 9072.604135, 9470.604135HCIC-REL-PCK-0013
5 in
127 mm		3 in
76.2 mm		23 in
584.2 mm		0604134, 1108287, 9072.604134, 9470.604134HCIC-REL-PCK-0013

McNeilus® McNeilus Metro Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
4.5 in
114.3 mm		2 in
50.8 mm		26.5 in
673.1 mm		0606960, 1106959, 1148322, 9470.606690, 9470.606960HCIC-REL-PCK-0014
4 in
101.6 mm		2.5 in
63.5 mm		21.63 in
549.4 mm		0606950, 1106958, 9270.606950, 9470.606950, 9872.622251HCIC-REL-PCK-0014

McNeilus® McNeilus Tag Axle Rear Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		4 in
101.6 mm		37.25 in
946.1 mm		0604976, 1109368, 9970.604976HCIC-REL-PCK-0015
4.5 in
114.3 mm		3.5 in
88.9 mm		23 in
584.2 mm		0604145, 1108292, 9470.604145HCIC-REL-PCK-0015

Pak-Mor® Pak-Mor Rear Loader

4 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		2.5 in
63.5 mm		42 in
1066.8 mm		4148023HCIC-REL-PCK-0016
6 in
152.4 mm		3 in
76.2 mm		40 in
1016 mm		4148037HCIC-REL-PCK-0016
5 in
127 mm		2.5 in
63.5 mm		24 in
609.6 mm		4148022HCIC-REL-PCK-0016
6 in
152.4 mm		3 in
76.2 mm		26.0024 in
660.5 mm		4148000HCIC-REL-PCK-0016

Reference Dimensions & HCIC Build-to-Order Parameters

50 documented configurations for packer blade cylinders on rear loader bodies (source application guide pp. 80–157). Third-party reference data and HCIC build-to-order parameters are shown in two physically separate tables.

Reference Data Disclaimer

The dimensional information in the table below is compiled from publicly available third-party refuse-body cylinder application and crossover listings, and is reproduced for identification and enquiry purposes only. The original publisher states that such crossover and application data is "for reference only, and no other conditions are expressed or implied." HCIC does not warrant the accuracy or completeness of third-party reference data and does not represent it as HCIC's own measured specification. Bore, rod and stroke figures are indicative values only; final manufacturing dimensions, tolerances, materials, seal configurations, pressure ratings and port/mounting interfaces are determined solely by the drawing approved by the customer for each order.

Table A — Third-party reference data (for identification only)

Vehicle modelBrandOEM ref. part numbers
(identification only)		Bore
in / mm		Rod
in / mm		Stroke
in / mm
Dempster, Routeking II Rear LoaderDempster®AB19600TH, AB26635TH, BB6997, BB8112, BB8133-1, DB80436
152.4 mm		2.5
63.5 mm		34
863.6 mm
Dempster, Routeking II Rear LoaderDempster®AB19601TH, BB6996, BB8134-1, BB8235, DB80425
127 mm		3
76.2 mm		27
685.8 mm
E-Z Pack, Apollo Rear LoaderE-Z Pack®21-01648 K4538FDA, 21-14653 C4538DDA4.5
114.3 mm		2
50.8 mm		38.31
973.1 mm
E-Z Pack, Apollo Rear LoaderE-Z Pack®21-01883 K4025FDA, 20-49775 D4025ADA, 21-14634 C4025MDA4
101.6 mm		2.5
63.5 mm		24.81
630.2 mm
E-Z Pack, C200 & M150 Rear LoaderE-Z Pack®21-03472 K4030LDA4
101.6 mm		1.75
44.4 mm		30.38
771.7 mm
E-Z Pack, C200 & M150 Rear LoaderE-Z Pack®21-01630 K3021LDA3
76.2 mm		1.75
44.4 mm		21.13
536.7 mm
E-Z Pack, C200 & M150 Rear LoaderE-Z Pack®21-03471 K3526NDA3.5
88.9 mm		1.75
44.4 mm		26.31
668.3 mm
E-Z Pack, C200 & M150 Rear LoaderE-Z Pack®21-01634 K3018GDA, 21-14675 C3018HDA3
76.2 mm		1.75
44.4 mm		18
457.2 mm
E-Z Pack, Goliath II Rear LoaderE-Z Pack®21-01954 K5538CDA, 20-49774 D5538ADA, 21-14635 C5538DDA5.5
139.7 mm		2.5
63.5 mm		38.31
973.1 mm
E-Z Pack, Goliath II Rear LoaderE-Z Pack®21-01883 K4025FDA, 20-49775 D4025ADA, 21-14634 C4025MDA4
101.6 mm		2.5
63.5 mm		24.81
630.2 mm
E-Z Pack, Goliath Rear LoaderE-Z Pack®20-44095 6042DA, 20-44973 6042ADA, 20-46077 D6042BDA, 20-47092 D6042CDA6
152.4 mm		2.75
69.8 mm		42.63
1082.8 mm
E-Z Pack, Goliath Rear LoaderE-Z Pack®20-43726 4028DA, 20-44969 4028BDA, 20-46076 D4028DDA, 20-46382 D4028EDA, 20-47091 D4028FDA, 20-49897 D4028KDA, 21-01531 K4028LDA, 21-14658 C4028MDA4
101.6 mm		2.75
69.8 mm		28.5
723.9 mm
E-Z Pack, Goliath Rear LoaderE-Z Pack®21-02610 K4025GDA, 21-14661 C4025NDA4
101.6 mm		2.75
69.8 mm		25.62
650.7 mm
G & H Manufacturing R-90 Recycling Rear LoaderG & H Manufacturing™A2610, H1234, PH-020-8035
127 mm		2
50.8 mm		30
762 mm
G & H Manufacturing R-90 Recycling Rear LoaderG & H Manufacturing™A4456, H12384.5
114.3 mm		2.5
63.5 mm		16.75
425.4 mm
Heil Big Bite Rear LoaderHeil®1-64565.5
139.7 mm		4
101.6 mm		35.88
911.4 mm
Heil Big Bite Rear LoaderHeil®1-64575.5
139.7 mm		3.5
88.9 mm		24
609.6 mm
Heil Formula 4000 Rear LoaderHeil®1-4108, 1-43344
101.6 mm		2.5
63.5 mm		21.63
549.4 mm
Heil Formula 4000 Rear LoaderHeil®1-2931, 1-3672, 1-3856, 1-3902, 1-4017, 1-41003.5
88.9 mm		2.25
57.1 mm		21.63
549.4 mm
Heil Formula 4000 Rear LoaderHeil®1-4081, 1-41104.5
114.3 mm		2
50.8 mm		26.5
673.1 mm
Heil Formula 4000 Rear LoaderHeil®1-2928, 1-3635, 1-3809, 1-3921, 1-4018, 1-41014.5
114.3 mm		2
50.8 mm		26.94
684.3 mm
Heil Formula 5000 Rear LoaderHeil®1-4824, 1-4828, 1-4884, 1-5110, 1-66105
127 mm		2.5
63.5 mm		36
914.4 mm
Heil Formula 5000 Rear LoaderHeil®1-40935
127 mm		2.5
63.5 mm		36
914.4 mm
Heil Formula 5000 Rear LoaderHeil®1-4347, 1-4887, 1-5111, 1-66115.5
139.7 mm		3.5
88.9 mm		24.25
615.9 mm
Heil Formula 5000 Rear LoaderHeil®1-40945
127 mm		3
76.2 mm		20
508 mm
Leach 2RII Rear LoaderLeach®2R1006A, 3048056
152.4 mm		4.5
114.3 mm		30.25
768.3 mm
Leach 2RII Rear LoaderLeach®2R1008R, 32046, 300679, 300900, 300990, 303904, 305827, 3065626
152.4 mm		4.5
114.3 mm		30.25
768.3 mm
Leach 2RII Rear LoaderLeach®304168, 307081, 6205686
152.4 mm		4.5
114.3 mm		30.25
768.3 mm
Leach 2RII Rear LoaderLeach®700081, 7174886
152.4 mm		4.5
114.3 mm		30.25
768.3 mm
Leach 2RII Rear LoaderLeach®307082, 620509, 7002896
152.4 mm		4.5
114.3 mm		27.81
706.4 mm
Leach Alpha, Beta & Delta Rear LoaderLeach®2106584.5
114.3 mm		2.5
63.5 mm		32.5
825.5 mm
Leach Alpha, Beta & Delta Rear LoaderLeach®404411, 4065785
127 mm		3.5
88.9 mm		32.5
825.5 mm
Leach Alpha, Beta & Delta Rear LoaderLeach®601366———
Leach Alpha, Beta & Delta Rear LoaderLeach®2106595.5
139.7 mm		2.5
63.5 mm		37
939.8 mm
Leach Alpha, Beta & Delta Rear LoaderLeach®401965, 402735, 4065776
152.4 mm		——
Leach Alpha, Beta & Delta Rear LoaderLeach®210628———
McNeilus (MTM) Standard & Heavy Duty Rear LoaderMcNeilus®0604144, 1109366, 9470.6041444.5
114.3 mm		3.5
88.9 mm		32.5
825.5 mm
McNeilus (MTM) Standard & Heavy Duty Rear LoaderMcNeilus®0604146, 1108291, 9470.6041465
127 mm		4
101.6 mm		32.5
825.5 mm
McNeilus (MTM) Standard & Heavy Duty Rear LoaderMcNeilus®0604143, 1109367, 9470.6041434
101.6 mm		3
76.2 mm		23
584.2 mm
McNeilus (MTM) Standard & Heavy Duty Rear LoaderMcNeilus®0604145, 1108292, 9470.6041454.5
114.3 mm		3.5
88.9 mm		23
584.2 mm
McNeilus (MTM) XC High Compaction Rear LoaderMcNeilus®0604135, 1108286, 9072.604135, 9470.6041355.5
139.7 mm		4.5
114.3 mm		38.62
980.9 mm
McNeilus (MTM) XC High Compaction Rear LoaderMcNeilus®0604134, 1108287, 9072.604134, 9470.6041345
127 mm		3
76.2 mm		23
584.2 mm
McNeilus Metro Rear LoaderMcNeilus®0606960, 1106959, 1148322, 9470.606690, 9470.6069604.5
114.3 mm		2
50.8 mm		26.5
673.1 mm
McNeilus Metro Rear LoaderMcNeilus®0606950, 1106958, 9270.606950, 9470.606950, 9872.6222514
101.6 mm		2.5
63.5 mm		21.63
549.4 mm
McNeilus Tag Axle Rear LoaderMcNeilus®0604976, 1109368, 9970.6049765
127 mm		4
101.6 mm		37.25
946.1 mm
McNeilus Tag Axle Rear LoaderMcNeilus®0604145, 1108292, 9470.6041454.5
114.3 mm		3.5
88.9 mm		23
584.2 mm
Pak-Mor Rear LoaderPak-Mor®41480235
127 mm		2.5
63.5 mm		42
1066.8 mm
Pak-Mor Rear LoaderPak-Mor®41480376
152.4 mm		3
76.2 mm		40
1016 mm
Pak-Mor Rear LoaderPak-Mor®41480225
127 mm		2.5
63.5 mm		24
609.6 mm
Pak-Mor Rear LoaderPak-Mor®41480006
152.4 mm		3
76.2 mm		26.0024
660.5 mm

Table A reproduces third-party listing values for identification and enquiry purposes only. It is not an HCIC specification and does not imply interchangeability with any listed part.

Non-OEM, Build-to-Order Statement

HCIC cylinders are aftermarket, build-to-order replacement cylinders. They are not original equipment parts, and HCIC is not an authorized distributor of, nor affiliated with, any original equipment manufacturer named on this page. Unless a customer supplies a drawing, sample or nameplate data, HCIC manufactures each cylinder to the drawing prepared by HCIC and approved in writing by the customer before production begins (the "Drawing for Approval" process). Fitness for a particular application depends on operating pressure, duty cycle, mounting geometry, fluid compatibility and vehicle configuration; the buyer is responsible for confirming suitability, and HCIC's responsibility is limited to conformity with the approved drawing and the written warranty supplied with the order.

Table B — HCIC build-to-order parameters

Vehicle modelHCIC Series Model No.TypeDimensions
Dempster, Routeking II Rear LoaderHCIC-REL-PCK-0001Single-stage rodTo approved drawing
E-Z Pack, Apollo Rear LoaderHCIC-REL-PCK-0002Single-stage rodTo approved drawing
E-Z Pack, C200 & M150 Rear LoaderHCIC-REL-PCK-0003Single-stage rodTo approved drawing
E-Z Pack, Goliath II Rear LoaderHCIC-REL-PCK-0004Single-stage rodTo approved drawing
E-Z Pack, Goliath Rear LoaderHCIC-REL-PCK-0005Single-stage rodTo approved drawing
G & H Manufacturing R-90 Recycling Rear LoaderHCIC-REL-PCK-0006Single-stage rodTo approved drawing
Heil Big Bite Rear LoaderHCIC-REL-PCK-0007Single-stage rodTo approved drawing
Heil Formula 4000 Rear LoaderHCIC-REL-PCK-0008Single-stage rodTo approved drawing
Heil Formula 5000 Rear LoaderHCIC-REL-PCK-0009Single-stage rodTo approved drawing
Leach 2RII Rear LoaderHCIC-REL-PCK-0010Single-stage rodTo approved drawing
Leach Alpha, Beta & Delta Rear LoaderHCIC-REL-PCK-0011Single-stage rodTo approved drawing
McNeilus (MTM) Standard & Heavy Duty Rear LoaderHCIC-REL-PCK-0012Single-stage rodTo approved drawing
McNeilus (MTM) XC High Compaction Rear LoaderHCIC-REL-PCK-0013Single-stage rodTo approved drawing
McNeilus Metro Rear LoaderHCIC-REL-PCK-0014Single-stage rodTo approved drawing
McNeilus Tag Axle Rear LoaderHCIC-REL-PCK-0015Single-stage rodTo approved drawing
Pak-Mor Rear LoaderHCIC-REL-PCK-0016Single-stage rodTo approved drawing

Table B lists HCIC's own build-to-order series numbers. Every HCIC cylinder is manufactured to the customer-approved drawing, so dimensions are not pre-set from the third-party values in Table A — they are fixed by the approved drawing for each order.

Why Refuse-Fleet Buyers Choose HCIC

Build-to-orderPer approved drawing
Drawing for ApprovalRequired before production
1 pcMOQ
18 moWarranty (written terms)
48 hrQuotation
50Documented configurations
16Compatible models
Design ref.ISO 6020 / 6022

About HCIC

HCIC International Group Co., Limited is a hydraulic cylinder manufacturer based in Jinan, China. Cylinders are designed with reference to ISO 6020, ISO 6022 and ISO 10100, and every build-to-order unit is manufactured only to the drawing approved in writing by the customer (Drawing for Approval), with a minimum order quantity of one piece and an 18-month warranty (written terms apply).

Our Factory

HCIC operates hydraulic-cylinder production facilities with in-house engineering in Jinan, China. In-house production covers tube honing, precision rod grinding and hard-chrome plating, CNC machining of mounts, pins and ports, robotic welding, assembly and pressure testing before dispatch. Multi-stage telescopic cylinders, single-stage rod cylinders and custom engineered units are all built to the drawing approved by the customer, with material and test records kept for every batch.

Ordering, MOQ & Lead Time

MOQ 1 piece

Order a single replacement cylinder. A non-recurring engineering / setup charge may apply to one-off custom builds.

48-hour quotation

Quotation within 48 business hours of receiving complete information (drawing, sample, or nameplate data).

Drawing for Approval

Every build-to-order cylinder starts with a formal HCIC drawing that you approve in writing before production.

18-month warranty

Warranty against defects in materials and workmanship, per the written warranty terms supplied with each order. Request the full warranty terms and exclusions document from HCIC before ordering.

Frequently Asked Questions

Are these rear loader original equipment parts?

No. HCIC cylinders are aftermarket, build-to-order replacement cylinders. HCIC is not affiliated with, authorized by, or endorsed by Dempster, E-Z Pack, G & H Manufacturing, Heil, Leach, McNeilus, Pak-Mor or any original equipment manufacturer. Each cylinder is manufactured to a drawing approved in writing by the customer before production (the Drawing for Approval process).

Which rear loader brands do these packer blade cylinders fit?

HCIC builds these cylinders to order for the rear loader models documented on this page: Dempster, E-Z Pack, G & H Manufacturing, Heil, Leach, McNeilus, Pak-Mor. Vehicle names are used for identification only. Send your vehicle model and function position, and HCIC engineers will confirm the configuration and issue a drawing for your written approval.

What is the minimum order quantity for one packer blade cylinders?

The minimum order quantity is one piece. HCIC supplies these cylinders build-to-order: quotation within 48 business hours of receiving complete information, a drawing approved in writing by the customer before production, and an 18-month warranty per the written warranty terms supplied with each order. A non-recurring engineering / setup charge may apply to one-off custom builds.

Request a Quotation

Tell us the vehicle model, the function position, and attach your nameplate photo or drawing. We reply within 48 business hours.

Trademark & Third-Party Name Notice

Heil®, McNeilus®, Galbreath®, Leach®, E-Z Pack®, Dempster®, Wittke®, Pak-Mor®, Maxon®, Labrie®, Kann®, Accurate Industries™, Benlee™, G & H Manufacturing™, G-S Products™, Automated Waste™ and American Roll-Off™, and all other third-party names, model designations and part numbers on this page are the trademarks, trade names or identifiers of their respective owners. They are used solely to identify the vehicle application or function position for which a build-to-order replacement cylinder may be requested, because no other means of identification is reasonably available. Such use does not imply affiliation with, authorization by, endorsement by, or sponsorship of HCIC or its products by any such owner, and does not imply that any HCIC cylinder is an original equipment part or has been approved, tested or certified by any such owner.

Data Sources

[1] Parker Hannifin Corporation, Mobile Cylinder Division. Telescopic Mobile Cylinders [Z]. Youngstown, OH: Parker Hannifin Corporation, [n.d.], pp. 80–157 (Refuse Body Cylinder Application Guide). Crossover and application data as published: "for reference only; no other conditions are expressed or implied." Extracted 2026-10-16; used for identification and enquiry reference only.