This page was drafted with generative-AI assistance and is pending HCIC engineering and compliance review prior to publication.
HCICHydraulic Cylinders

Roll-Offs · Build-to-Order · Aftermarket

Hoist / Tilt-Dump Cylinders for Roll-Offs

Status: aftermarket, build-to-order replacement cylinders — not original equipment parts; manufactured only to the customer-approved drawing (Drawing for Approval).

HCIC builds hoist / tilt-dump cylinders to order for roll-off bodies — 47 documented configurations across 13 vehicle models from including 21 telescopic multi-stage units, each listed individually in the configuration cards below (Accurate Industries™, Automated Waste™, Benlee™, Dempster®, G & H Manufacturing™, Galbreath®, McNeilus®). Every unit is engineered to the customer-approved drawing under ISO 6020 / 6022 design practice, with an 18-month warranty and a 48-hour quotation.

Request a QuotationView Brand Fitment
ISO 6020 / 6022 design reference18-Month Warranty (written terms apply)48-Hour QuotationMOQ 1 PieceDrawing for Approval

What This Cylinder Does

On a roll-off, this cylinder lifts and tilts the body or hoist frame for dumping. HCIC manufactures it as a build-to-order ' 'replacement unit: send the vehicle model, the function position, and a nameplate photo, ' 'drawing or sample, and HCIC engineers issue a Drawing for Approval for your written ' 'confirmation before production.

Fig. 1 — Hoist / Tilt-Dump Cylinders position on a roll-off body (reference vehicle: Galbreath Roll-Off)
Hoist / Tilt-Dump Cylinders position reference on a roll-off body (Galbreath Roll-Off) - source application guide figure
Reference figure reproduced from the source third-party application guide for identification of the cylinder function position only. HCIC cylinders are manufactured to the customer-approved drawing, not to this figure.

Brand & Vehicle Fitment

Hoist / Tilt-Dump Cylinders documented across 13 vehicle models from 7 brands. Third-party names identify the vehicle application only — see the Trademark Notice below.

BrandModelsCompatible vehicle models
Accurate Industries™2Accurate Industries AH-AB-60 Bail Hook Roll-Off; Accurate Industries Roll-Off
Automated Waste™1Automated Waste / American Roll-Off
Benlee™1Benlee Roll-Off
Dempster®2Dempster, Dinosaur Roll-Off; Dempster, Dragon Roll -Off
G & H Manufacturing™2G & H Manufacturing 1500 & 1560 Roll-Off; G & H Manufacturing 1700 Roll-Off Trailer
Galbreath®4Galbreath Hook Lift Roll-Off; Galbreath Roll-Off; Galbreath Roll-Off Trailers; Galbreath Single Axle Roll-Off
McNeilus®1McNeilus Roll-Off

Fitment entries are compiled from third-party application listings for identification and enquiry purposes only. Fitment does not imply interchangeability with any listed part or authorization by any listed manufacturer.

Documented Configurations by Vehicle Model

Hoist / Tilt-Dump Cylinders across 13 vehicle models. Each card below lists the documented reference dimensions, OEM reference numbers (identification only) and the HCIC build-to-order model for that vehicle. HCIC cylinders are manufactured only to the customer-approved drawing.

Accurate Industries™ Accurate Industries AH-AB-60 Bail Hook Roll-Off

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6.25 in
158.8 mm		3 in
76.2 mm		68.5 in
1739.9 mm		A-18HCIC-RRO-HOI-0001

Accurate Industries™ Accurate Industries Roll-Off

3 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6.25 in
158.8 mm		4.75 in
120.6 mm		80 in
2032 mm		HH-1, HP-HH001HCIC-RRO-HOI-0002
7.25 in
184.1 mm		4.75 in
120.6 mm		80 in
2032 mm		MF-51, HH-2, HP-HH002HCIC-RRO-HOI-0002
Telescopic multi-stage — stage sizes not stated in the reference dataHP-HH004, HP-HH011, HP-HH012HCIC-RRO-HOI-0002

Automated Waste™ Automated Waste / American Roll-Off

7 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6.25 in
158.8 mm		4.75 in
120.6 mm		78 in
1981.2 mm		B611HCIC-RRO-HOI-0003
6.25 in
158.8 mm		4.75 in
120.6 mm		80.88 in
2054.4 mm		110-450HCIC-RRO-HOI-0003
6.25 in
158.8 mm		4.75 in
120.6 mm		80.88 in
2054.4 mm		110-460HCIC-RRO-HOI-0003
7.25 in
184.1 mm		4.75 in
120.6 mm		83.62 in
2123.9 mm		110-500HCIC-RRO-HOI-0003
7.25 in
184.1 mm		4.75 in
120.6 mm		80.88 in
2054.4 mm		110-510HCIC-RRO-HOI-0003
Telescopic multi-stage — stage sizes not stated in the reference data110-100HCIC-RRO-HOI-0003
Telescopic multi-stage — stage sizes not stated in the reference data110-200, 110-300, B532CHCIC-RRO-HOI-0003

Benlee™ Benlee Roll-Off

6 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
Telescopic multi-stage — stage sizes not stated in the reference data—HCIC-RRO-HOI-0004
Telescopic multi-stage — stage sizes not stated in the reference data—HCIC-RRO-HOI-0004
Telescopic multi-stage — stage sizes not stated in the reference data—HCIC-RRO-HOI-0004
Telescopic multi-stage — stage sizes not stated in the reference data—HCIC-RRO-HOI-0004
Telescopic multi-stage — stage sizes not stated in the reference data—HCIC-RRO-HOI-0004
Telescopic multi-stage — stage sizes not stated in the reference data—HCIC-RRO-HOI-0004

Dempster® Dempster, Dinosaur Roll-Off

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		3 in
76.2 mm		72.5 in
1841.5 mm		CB3717, DB8052HCIC-RRO-HOI-0005
6 in
152.4 mm		3 in
76.2 mm		68.5 in
1739.9 mm		BB8212, BB8779, CB1757, DB8008HCIC-RRO-HOI-0005

Dempster® Dempster, Dragon Roll -Off

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
Telescopic multi-stage — stage sizes not stated in the reference dataCB7015, CB7781HCIC-RRO-HOI-0006
6 in
152.4 mm		3 in
76.2 mm		76 in
1930.4 mm		DB7694, BB9290, AB19461HCIC-RRO-HOI-0006

G & H Manufacturing™ G & H Manufacturing 1500 & 1560 Roll-Off

7 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6 in
152.4 mm		4 in
101.6 mm		79 in
2006.6 mm		H3291, P1331, PH-020-168 NPT PortsHCIC-RRO-HOI-0007
6 in
152.4 mm		4 in
101.6 mm		79 in
2006.6 mm		FA1001 SAE PortsHCIC-RRO-HOI-0007
7 in
177.8 mm		4 in
101.6 mm		79 in
2006.6 mm		H3292 NPT PortsHCIC-RRO-HOI-0007
7 in
177.8 mm		4 in
101.6 mm		79 in
2006.6 mm		H3292 SAE PortsHCIC-RRO-HOI-0007
Telescopic multi-stage — stage sizes not stated in the reference data—HCIC-RRO-HOI-0007
Telescopic multi-stage — stage sizes not stated in the reference data020116, PH-020-116HCIC-RRO-HOI-0007
Telescopic multi-stage — stage sizes not stated in the reference dataH2208HCIC-RRO-HOI-0007

G & H Manufacturing™ G & H Manufacturing 1700 Roll-Off Trailer

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6 in
152.4 mm		4 in
101.6 mm		79 in
2006.6 mm		H3291, P1331, PH-020-168 NPT PortsHCIC-RRO-HOI-0008
6 in
152.4 mm		4 in
101.6 mm		79 in
2006.6 mm		FA1001 SAE PortsHCIC-RRO-HOI-0008

Galbreath® Galbreath Hook Lift Roll-Off

3 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		3 in
76.2 mm		52 in
1320.8 mm		9932, A1890, A2077, A2152, A3109HCIC-RRO-HOI-0009
6 in
152.4 mm		3.5 in
88.9 mm		78 in
1981.2 mm		A1213, A1453, A3123HCIC-RRO-HOI-0009
7 in
177.8 mm		3.5 in
88.9 mm		81 in
2057.4 mm		9566, A1528, A3151HCIC-RRO-HOI-0009

Galbreath® Galbreath Roll-Off

9 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6 in
152.4 mm		4.5 in
114.3 mm		72 in
1828.8 mm		1039, 1043, 1126, 3412, 9920, A1527, A1793, A3137, B1043HCIC-RRO-HOI-0010
Telescopic multi-stage — stage sizes not stated in the reference data2494, 3131, 3242, 3903, A2213 A3171, A3381HCIC-RRO-HOI-0010
6 in
152.4 mm		4.5 in
114.3 mm		72 in
1828.8 mm		1039, 1043, 1126, 3412, 9920, A1527, A1793, A3137, B1043HCIC-RRO-HOI-0010
Telescopic multi-stage — stage sizes not stated in the reference data2419, 3116, 3139, 3902, A2083, A3167, A3377HCIC-RRO-HOI-0010
6 in
152.4 mm		4.5 in
114.3 mm		72 in
1828.8 mm		1039, 1043, 1126, 3412, 9920, A1527, A1793, A3137, B1043HCIC-RRO-HOI-0010
Telescopic multi-stage — stage sizes not stated in the reference dataUM-IO 2420, 8973, A2212, A3169, A3379HCIC-RRO-HOI-0010
Telescopic multi-stage — stage sizes not stated in the reference dataUX-DL, UX-OR, UX-IO, UX-5 2494, 3131, 3242, 3903, A2213 A3171, A3381HCIC-RRO-HOI-0010
Telescopic multi-stage — stage sizes not stated in the reference data2419, 3116, 3139, 3902, A2083, A3167, A3377HCIC-RRO-HOI-0010
Telescopic multi-stage — stage sizes not stated in the reference dataUT-IO-174 & -182, -IX- , -SI- 1111, A1606, A1745, A3173, A3383HCIC-RRO-HOI-0010

Galbreath® Galbreath Roll-Off Trailers

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
Telescopic multi-stage — stage sizes not stated in the reference data2420, 8973, A2212, A3169, A3379HCIC-RRO-HOI-0011
Telescopic multi-stage — stage sizes not stated in the reference data1111, A1606, A1745, A3173, A3383HCIC-RRO-HOI-0011

Galbreath® Galbreath Single Axle Roll-Off

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
5 in
127 mm		3 in
76.2 mm		54 in
1371.6 mm		9015, A3111HCIC-RRO-HOI-0012

McNeilus® McNeilus Roll-Off

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
6.25 in
158.8 mm		4.75 in
120.6 mm		80 in
2032 mm		0651550, 1146285, 1229476, 9070.651550, 9070.654695, 9180.651550HCIC-RRO-HOI-0013
7.25 in
184.1 mm		4.75 in
120.6 mm		80 in
2032 mm		1148237, 9070.654697, 9180.654697HCIC-RRO-HOI-0013

Reference Dimensions & HCIC Build-to-Order Parameters

47 documented configurations for hoist / tilt-dump cylinders on roll-off bodies (source application guide pp. 80–157). Third-party reference data and HCIC build-to-order parameters are shown in two physically separate tables.

Reference Data Disclaimer

The dimensional information in the table below is compiled from publicly available third-party refuse-body cylinder application and crossover listings, and is reproduced for identification and enquiry purposes only. The original publisher states that such crossover and application data is "for reference only, and no other conditions are expressed or implied." HCIC does not warrant the accuracy or completeness of third-party reference data and does not represent it as HCIC's own measured specification. Bore, rod and stroke figures are indicative values only; final manufacturing dimensions, tolerances, materials, seal configurations, pressure ratings and port/mounting interfaces are determined solely by the drawing approved by the customer for each order.

Table A — Third-party reference data (for identification only)

Vehicle modelBrandOEM ref. part numbers
(identification only)		Bore
in / mm		Rod
in / mm		Stroke
in / mm
Accurate Industries AH-AB-60 Bail Hook Roll-OffAccurate Industries™A-186.25
158.8 mm		3
76.2 mm		68.5
1739.9 mm
Accurate Industries Roll-OffAccurate Industries™HH-1, HP-HH0016.25
158.8 mm		4.75
120.6 mm		80
2032 mm
Accurate Industries Roll-OffAccurate Industries™MF-51, HH-2, HP-HH0027.25
184.1 mm		4.75
120.6 mm		80
2032 mm
Accurate Industries Roll-OffAccurate Industries™HP-HH004, HP-HH011, HP-HH012Telescopic — stage sizes not stated120
3048 mm
Automated Waste / American Roll-OffAutomated Waste™B6116.25
158.8 mm		4.75
120.6 mm		78
1981.2 mm
Automated Waste / American Roll-OffAutomated Waste™110-4506.25
158.8 mm		4.75
120.6 mm		80.88
2054.4 mm
Automated Waste / American Roll-OffAutomated Waste™110-4606.25
158.8 mm		4.75
120.6 mm		80.88
2054.4 mm
Automated Waste / American Roll-OffAutomated Waste™110-5007.25
184.1 mm		4.75
120.6 mm		83.62
2123.9 mm
Automated Waste / American Roll-OffAutomated Waste™110-5107.25
184.1 mm		4.75
120.6 mm		80.88
2054.4 mm
Automated Waste / American Roll-OffAutomated Waste™110-100Telescopic — stage sizes not stated92
2336.8 mm
Automated Waste / American Roll-OffAutomated Waste™110-200, 110-300, B532CTelescopic — stage sizes not stated110
2794 mm
Benlee Roll-OffBenlee™—Telescopic — stage sizes not stated120
3048 mm
Benlee Roll-OffBenlee™—Telescopic — stage sizes not stated144
3657.6 mm
Benlee Roll-OffBenlee™—Telescopic — stage sizes not stated168
4267.2 mm
Benlee Roll-OffBenlee™—Telescopic — stage sizes not stated220
5588 mm
Benlee Roll-OffBenlee™—Telescopic — stage sizes not stated174
4419.6 mm
Benlee Roll-OffBenlee™—Telescopic — stage sizes not stated220
5588 mm
Dempster, Dinosaur Roll-OffDempster®CB3717, DB80525
127 mm		3
76.2 mm		72.5
1841.5 mm
Dempster, Dinosaur Roll-OffDempster®BB8212, BB8779, CB1757, DB80086
152.4 mm		3
76.2 mm		68.5
1739.9 mm
Dempster, Dragon Roll -OffDempster®CB7015, CB7781Telescopic — stage sizes not stated111
2819.4 mm
Dempster, Dragon Roll -OffDempster®DB7694, BB9290, AB194616
152.4 mm		3
76.2 mm		76
1930.4 mm
G & H Manufacturing 1500 & 1560 Roll-OffG & H Manufacturing™H3291, P1331, PH-020-168 NPT Ports6
152.4 mm		4
101.6 mm		79
2006.6 mm
G & H Manufacturing 1500 & 1560 Roll-OffG & H Manufacturing™FA1001 SAE Ports6
152.4 mm		4
101.6 mm		79
2006.6 mm
G & H Manufacturing 1500 & 1560 Roll-OffG & H Manufacturing™H3292 NPT Ports7
177.8 mm		4
101.6 mm		79
2006.6 mm
G & H Manufacturing 1500 & 1560 Roll-OffG & H Manufacturing™H3292 SAE Ports7
177.8 mm		4
101.6 mm		79
2006.6 mm
G & H Manufacturing 1500 & 1560 Roll-OffG & H Manufacturing™—Telescopic — stage sizes not stated79
2006.6 mm
G & H Manufacturing 1500 & 1560 Roll-OffG & H Manufacturing™020116, PH-020-116Telescopic — stage sizes not stated115.81
2941.6 mm
G & H Manufacturing 1500 & 1560 Roll-OffG & H Manufacturing™H2208Telescopic — stage sizes not stated115.75
2940 mm
G & H Manufacturing 1700 Roll-Off TrailerG & H Manufacturing™H3291, P1331, PH-020-168 NPT Ports6
152.4 mm		4
101.6 mm		79
2006.6 mm
G & H Manufacturing 1700 Roll-Off TrailerG & H Manufacturing™FA1001 SAE Ports6
152.4 mm		4
101.6 mm		79
2006.6 mm
Galbreath Hook Lift Roll-OffGalbreath®9932, A1890, A2077, A2152, A31095
127 mm		3
76.2 mm		52
1320.8 mm
Galbreath Hook Lift Roll-OffGalbreath®A1213, A1453, A31236
152.4 mm		3.5
88.9 mm		78
1981.2 mm
Galbreath Hook Lift Roll-OffGalbreath®9566, A1528, A31517
177.8 mm		3.5
88.9 mm		81
2057.4 mm
Galbreath Roll-OffGalbreath®1039, 1043, 1126, 3412, 9920, A1527, A1793, A3137, B10436
152.4 mm		4.5
114.3 mm		72
1828.8 mm
Galbreath Roll-OffGalbreath®2494, 3131, 3242, 3903, A2213 A3171, A3381Telescopic — stage sizes not stated94
2387.6 mm
Galbreath Roll-OffGalbreath®1039, 1043, 1126, 3412, 9920, A1527, A1793, A3137, B10436
152.4 mm		4.5
114.3 mm		72
1828.8 mm
Galbreath Roll-OffGalbreath®2419, 3116, 3139, 3902, A2083, A3167, A3377Telescopic — stage sizes not stated114
2895.6 mm
Galbreath Roll-OffGalbreath®1039, 1043, 1126, 3412, 9920, A1527, A1793, A3137, B10436
152.4 mm		4.5
114.3 mm		72
1828.8 mm
Galbreath Roll-OffGalbreath®UM-IO 2420, 8973, A2212, A3169, A3379Telescopic — stage sizes not stated79
2006.6 mm
Galbreath Roll-OffGalbreath®UX-DL, UX-OR, UX-IO, UX-5 2494, 3131, 3242, 3903, A2213 A3171, A3381Telescopic — stage sizes not stated94
2387.6 mm
Galbreath Roll-OffGalbreath®2419, 3116, 3139, 3902, A2083, A3167, A3377Telescopic — stage sizes not stated114
2895.6 mm
Galbreath Roll-OffGalbreath®UT-IO-174 & -182, -IX- , -SI- 1111, A1606, A1745, A3173, A3383Telescopic — stage sizes not stated118
2997.2 mm
Galbreath Roll-Off TrailersGalbreath®2420, 8973, A2212, A3169, A3379Telescopic — stage sizes not stated79
2006.6 mm
Galbreath Roll-Off TrailersGalbreath®1111, A1606, A1745, A3173, A3383Telescopic — stage sizes not stated118
2997.2 mm
Galbreath Single Axle Roll-OffGalbreath®9015, A31115
127 mm		3
76.2 mm		54
1371.6 mm
McNeilus Roll-OffMcNeilus®0651550, 1146285, 1229476, 9070.651550, 9070.654695, 9180.6515506.25
158.8 mm		4.75
120.6 mm		80
2032 mm
McNeilus Roll-OffMcNeilus®1148237, 9070.654697, 9180.6546977.25
184.1 mm		4.75
120.6 mm		80
2032 mm

Table A reproduces third-party listing values for identification and enquiry purposes only. It is not an HCIC specification and does not imply interchangeability with any listed part.

Non-OEM, Build-to-Order Statement

HCIC cylinders are aftermarket, build-to-order replacement cylinders. They are not original equipment parts, and HCIC is not an authorized distributor of, nor affiliated with, any original equipment manufacturer named on this page. Unless a customer supplies a drawing, sample or nameplate data, HCIC manufactures each cylinder to the drawing prepared by HCIC and approved in writing by the customer before production begins (the "Drawing for Approval" process). Fitness for a particular application depends on operating pressure, duty cycle, mounting geometry, fluid compatibility and vehicle configuration; the buyer is responsible for confirming suitability, and HCIC's responsibility is limited to conformity with the approved drawing and the written warranty supplied with the order.

Table B — HCIC build-to-order parameters

Vehicle modelHCIC Series Model No.TypeDimensions
Accurate Industries AH-AB-60 Bail Hook Roll-OffHCIC-RRO-HOI-0001Single-stage rodTo approved drawing
Accurate Industries Roll-OffHCIC-RRO-HOI-0002Telescopic (multi-stage) / 1 stages documented in reference dataTo approved drawing
Automated Waste / American Roll-OffHCIC-RRO-HOI-0003Telescopic (multi-stage) / 2 stages documented in reference dataTo approved drawing
Benlee Roll-OffHCIC-RRO-HOI-0004Telescopic (multi-stage) / 6 stages documented in reference dataTo approved drawing
Dempster, Dinosaur Roll-OffHCIC-RRO-HOI-0005Single-stage rodTo approved drawing
Dempster, Dragon Roll -OffHCIC-RRO-HOI-0006Telescopic (multi-stage) / 1 stages documented in reference dataTo approved drawing
G & H Manufacturing 1500 & 1560 Roll-OffHCIC-RRO-HOI-0007Telescopic (multi-stage) / 3 stages documented in reference dataTo approved drawing
G & H Manufacturing 1700 Roll-Off TrailerHCIC-RRO-HOI-0008Single-stage rodTo approved drawing
Galbreath Hook Lift Roll-OffHCIC-RRO-HOI-0009Single-stage rodTo approved drawing
Galbreath Roll-OffHCIC-RRO-HOI-0010Telescopic (multi-stage) / 6 stages documented in reference dataTo approved drawing
Galbreath Roll-Off TrailersHCIC-RRO-HOI-0011Telescopic (multi-stage) / 2 stages documented in reference dataTo approved drawing
Galbreath Single Axle Roll-OffHCIC-RRO-HOI-0012Single-stage rodTo approved drawing
McNeilus Roll-OffHCIC-RRO-HOI-0013Single-stage rodTo approved drawing

Table B lists HCIC's own build-to-order series numbers. Every HCIC cylinder is manufactured to the customer-approved drawing, so dimensions are not pre-set from the third-party values in Table A — they are fixed by the approved drawing for each order.

Why Refuse-Fleet Buyers Choose HCIC

Build-to-orderPer approved drawing
Drawing for ApprovalRequired before production
1 pcMOQ
18 moWarranty (written terms)
48 hrQuotation
47Documented configurations
13Compatible models
Design ref.ISO 6020 / 6022

About HCIC

HCIC International Group Co., Limited is a hydraulic cylinder manufacturer based in Jinan, China. Cylinders are designed with reference to ISO 6020, ISO 6022 and ISO 10100, and every build-to-order unit is manufactured only to the drawing approved in writing by the customer (Drawing for Approval), with a minimum order quantity of one piece and an 18-month warranty (written terms apply).

Our Factory

HCIC operates hydraulic-cylinder production facilities with in-house engineering in Jinan, China. In-house production covers tube honing, precision rod grinding and hard-chrome plating, CNC machining of mounts, pins and ports, robotic welding, assembly and pressure testing before dispatch. Multi-stage telescopic cylinders, single-stage rod cylinders and custom engineered units are all built to the drawing approved by the customer, with material and test records kept for every batch.

Ordering, MOQ & Lead Time

MOQ 1 piece

Order a single replacement cylinder. A non-recurring engineering / setup charge may apply to one-off custom builds.

48-hour quotation

Quotation within 48 business hours of receiving complete information (drawing, sample, or nameplate data).

Drawing for Approval

Every build-to-order cylinder starts with a formal HCIC drawing that you approve in writing before production.

18-month warranty

Warranty against defects in materials and workmanship, per the written warranty terms supplied with each order. Request the full warranty terms and exclusions document from HCIC before ordering.

Frequently Asked Questions

Are these roll-off original equipment parts?

No. HCIC cylinders are aftermarket, build-to-order replacement cylinders. HCIC is not affiliated with, authorized by, or endorsed by Accurate Industries, Automated Waste, Benlee, Dempster, G & H Manufacturing, Galbreath, McNeilus or any original equipment manufacturer. Each cylinder is manufactured to a drawing approved in writing by the customer before production (the Drawing for Approval process).

Which roll-off brands do these hoist / tilt-dump cylinders fit?

HCIC builds these cylinders to order for the roll-off models documented on this page: Accurate Industries, Automated Waste, Benlee, Dempster, G & H Manufacturing, Galbreath, McNeilus. Vehicle names are used for identification only. Send your vehicle model and function position, and HCIC engineers will confirm the configuration and issue a drawing for your written approval.

What is the minimum order quantity for one hoist / tilt-dump cylinders?

The minimum order quantity is one piece. HCIC supplies these cylinders build-to-order: quotation within 48 business hours of receiving complete information, a drawing approved in writing by the customer before production, and an 18-month warranty per the written warranty terms supplied with each order. A non-recurring engineering / setup charge may apply to one-off custom builds.

Request a Quotation

Tell us the vehicle model, the function position, and attach your nameplate photo or drawing. We reply within 48 business hours.

Trademark & Third-Party Name Notice

Heil®, McNeilus®, Galbreath®, Leach®, E-Z Pack®, Dempster®, Wittke®, Pak-Mor®, Maxon®, Labrie®, Kann®, Accurate Industries™, Benlee™, G & H Manufacturing™, G-S Products™, Automated Waste™ and American Roll-Off™, and all other third-party names, model designations and part numbers on this page are the trademarks, trade names or identifiers of their respective owners. They are used solely to identify the vehicle application or function position for which a build-to-order replacement cylinder may be requested, because no other means of identification is reasonably available. Such use does not imply affiliation with, authorization by, endorsement by, or sponsorship of HCIC or its products by any such owner, and does not imply that any HCIC cylinder is an original equipment part or has been approved, tested or certified by any such owner.

Data Sources

[1] Parker Hannifin Corporation, Mobile Cylinder Division. Telescopic Mobile Cylinders [Z]. Youngstown, OH: Parker Hannifin Corporation, [n.d.], pp. 80–157 (Refuse Body Cylinder Application Guide). Crossover and application data as published: "for reference only; no other conditions are expressed or implied." Extracted 2026-10-16; used for identification and enquiry reference only.