This page was drafted with generative-AI assistance and is pending HCIC engineering and compliance review prior to publication.
HCICHydraulic Cylinders

Side Loaders · Build-to-Order · Aftermarket

Tailgate Raise Cylinders for Side Loaders

Status: aftermarket, build-to-order replacement cylinders — not original equipment parts; manufactured only to the customer-approved drawing (Drawing for Approval).

HCIC builds tailgate raise cylinders to order for side loader bodies — 22 documented configurations across 10 vehicle models from single-stage rod designs, each listed individually in the configuration cards below (E-Z Pack®, Heil®, Labrie®, Maxon®, McNeilus®, Wittke®). Every unit is engineered to the customer-approved drawing under ISO 6020 / 6022 design practice, with an 18-month warranty and a 48-hour quotation.

Request a QuotationView Brand Fitment
ISO 6020 / 6022 design reference18-Month Warranty (written terms apply)48-Hour QuotationMOQ 1 PieceDrawing for Approval

What This Cylinder Does

On a side loader, this cylinder raises and lowers the rear tailgate for loading and discharge. HCIC manufactures it as a build-to-order ' 'replacement unit: send the vehicle model, the function position, and a nameplate photo, ' 'drawing or sample, and HCIC engineers issue a Drawing for Approval for your written ' 'confirmation before production.

Fig. 1 — Tailgate Raise Cylinders position on a side loader body (reference vehicle: McNeilus AutoReach Side Loader)
Tailgate Raise Cylinders position reference on a side loader body (McNeilus AutoReach Side Loader) - source application guide figure
Reference figure reproduced from the source third-party application guide for identification of the cylinder function position only. HCIC cylinders are manufactured to the customer-approved drawing, not to this figure.

Brand & Vehicle Fitment

Tailgate Raise Cylinders documented across 10 vehicle models from 6 brands. Third-party names identify the vehicle application only — see the Trademark Notice below.

BrandModelsCompatible vehicle models
E-Z Pack®2E-Z Pack, HCSLA Side Loader; E-Z Pack, SLB Side Loader
Heil®2Heil Formula 7000 Automated Side Loader; Heil Rapid Rail Automated Side Loader
Labrie®1Labrie Equipment Side Loader
Maxon®1Maxon, Side Loader
McNeilus®2McNeilus AutoReach Side Loader; McNeilus Manual Side Loader
Wittke®2Wittke ASL Automated Side Loader; Wittke MSL Manual Side Loader

Fitment entries are compiled from third-party application listings for identification and enquiry purposes only. Fitment does not imply interchangeability with any listed part or authorization by any listed manufacturer.

Documented Configurations by Vehicle Model

Tailgate Raise Cylinders across 10 vehicle models. Each card below lists the documented reference dimensions, OEM reference numbers (identification only) and the HCIC build-to-order model for that vehicle. HCIC cylinders are manufactured only to the customer-approved drawing.

E-Z Pack® E-Z Pack, HCSLA Side Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.75 in
44.4 mm		33.38 in
847.9 mm		20-47048 D3033ADA, 20-52347 K3033DDA, 21-15644 C3033EDAHCIC-ASL-TGR-0001

E-Z Pack® E-Z Pack, SLB Side Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.75 in
44.4 mm		33.38 in
847.9 mm		20-47048 D3033ADA, 20-52347 K3033DDA, 21-15644 C3033EDAHCIC-ASL-TGR-0002

Heil® Heil Formula 7000 Automated Side Loader

3 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.5 in
38.1 mm		25.25 in
641.3 mm		1-4123, 1-4305HCIC-ASL-TGR-0003
3 in
76.2 mm		1.5 in
38.1 mm		28.19 in
716 mm		1-5088, 1-6521, 1-6721HCIC-ASL-TGR-0003
3 in
76.2 mm		1.5 in
38.1 mm		3.63 in
92.2 mm		1-3727, 1-6153, 1-6522, 1-6720HCIC-ASL-TGR-0003

Heil® Heil Rapid Rail Automated Side Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
3 in
76.2 mm		1.12 in
28.4 mm		18.5 in
469.9 mm		1-6163, 1-6405, 1-6554HCIC-ASL-TGR-0004

Labrie® Labrie Equipment Side Loader

1 configuration documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
2.5 in
63.5 mm		1.75 in
44.4 mm		38.81 in
985.8 mm		HYC00320HCIC-ASL-TGR-0005

Maxon® Maxon, Side Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
2.5 in
63.5 mm		—36 in
914.4 mm		222741HCIC-ASL-TGR-0006
3 in
76.2 mm		1.75 in
44.4 mm		36 in
914.4 mm		404800HCIC-ASL-TGR-0006

McNeilus® McNeilus AutoReach Side Loader

6 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
2.5 in
63.5 mm		1.5 in
38.1 mm		38 in
965.2 mm		0637009, 1000161, 9370.637009HCIC-ASL-TGR-0007
2.5 in
63.5 mm		1.5 in
38.1 mm		38 in
965.2 mm		0637010, 1100105, 1144707 9370.637010HCIC-ASL-TGR-0007
3 in
76.2 mm		2 in
50.8 mm		31 in
787.4 mm		0642853, 1000075, 9370.642853HCIC-ASL-TGR-0007
3.25 in
82.5 mm		2 in
50.8 mm		38 in
965.2 mm		0619882, 1000067, 1144703, 9272.604127, 9370.619882, 9370.604127HCIC-ASL-TGR-0007
2 in
50.8 mm		1.25 in
31.8 mm		12 in
304.8 mm		9370.634905HCIC-ASL-TGR-0007
2 in
50.8 mm		1.25 in
31.8 mm		20 in
508 mm		0634906, 9370.634906, 9370.643906HCIC-ASL-TGR-0007

McNeilus® McNeilus Manual Side Loader

3 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
2.5 in
63.5 mm		1.5 in
38.1 mm		38 in
965.2 mm		0637010, 1100105, 1144707, 9370.637010HCIC-ASL-TGR-0008
3 in
76.2 mm		2 in
50.8 mm		31 in
787.4 mm		0604125, 9272.604125, 9370.604125HCIC-ASL-TGR-0008
3 in
76.2 mm		2 in
50.8 mm		38 in
965.2 mm		0619882, 1000067, 1144703, 9272.604127, 9370.604127, 9370.619882HCIC-ASL-TGR-0008

Wittke® Wittke ASL Automated Side Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
2.5 in
63.5 mm		1.75 in
44.4 mm		42 in
1066.8 mm		FLHC-25, 010-9901HCIC-ASL-TGR-0009
2.5 in
63.5 mm		1.75 in
44.4 mm		36 in
914.4 mm		FLHC-29HCIC-ASL-TGR-0009

Wittke® Wittke MSL Manual Side Loader

2 configurations documented for this vehicle model — open the vehicle page for its full cylinder map.

Bore
in / mm		Rod
in / mm		Stroke
in / mm		OEM ref.
(identification only)		HCIC model
2.5 in
63.5 mm		1.75 in
44.4 mm		42 in
1066.8 mm		FLHC-25, 010-9901HCIC-ASL-TGR-0010
2.5 in
63.5 mm		1.75 in
44.4 mm		36 in
914.4 mm		FLHC-29, 010-9900, 110121-2HCIC-ASL-TGR-0010

Reference Dimensions & HCIC Build-to-Order Parameters

22 documented configurations for tailgate raise cylinders on side loader bodies (source application guide pp. 80–157). Third-party reference data and HCIC build-to-order parameters are shown in two physically separate tables.

Reference Data Disclaimer

The dimensional information in the table below is compiled from publicly available third-party refuse-body cylinder application and crossover listings, and is reproduced for identification and enquiry purposes only. The original publisher states that such crossover and application data is "for reference only, and no other conditions are expressed or implied." HCIC does not warrant the accuracy or completeness of third-party reference data and does not represent it as HCIC's own measured specification. Bore, rod and stroke figures are indicative values only; final manufacturing dimensions, tolerances, materials, seal configurations, pressure ratings and port/mounting interfaces are determined solely by the drawing approved by the customer for each order.

Table A — Third-party reference data (for identification only)

Vehicle modelBrandOEM ref. part numbers
(identification only)		Bore
in / mm		Rod
in / mm		Stroke
in / mm
E-Z Pack, HCSLA Side LoaderE-Z Pack®20-47048 D3033ADA, 20-52347 K3033DDA, 21-15644 C3033EDA3
76.2 mm		1.75
44.4 mm		33.38
847.9 mm
E-Z Pack, SLB Side LoaderE-Z Pack®20-47048 D3033ADA, 20-52347 K3033DDA, 21-15644 C3033EDA3
76.2 mm		1.75
44.4 mm		33.38
847.9 mm
Heil Formula 7000 Automated Side LoaderHeil®1-4123, 1-43053
76.2 mm		1.5
38.1 mm		25.25
641.3 mm
Heil Formula 7000 Automated Side LoaderHeil®1-5088, 1-6521, 1-67213
76.2 mm		1.5
38.1 mm		28.19
716 mm
Heil Formula 7000 Automated Side LoaderHeil®1-3727, 1-6153, 1-6522, 1-67203
76.2 mm		1.5
38.1 mm		3.63
92.2 mm
Heil Rapid Rail Automated Side LoaderHeil®1-6163, 1-6405, 1-65543
76.2 mm		1.12
28.4 mm		18.5
469.9 mm
Labrie Equipment Side LoaderLabrie®HYC003202.5
63.5 mm		1.75
44.4 mm		38.81
985.8 mm
Maxon, Side LoaderMaxon®2227412.5
63.5 mm		—36
914.4 mm
Maxon, Side LoaderMaxon®4048003
76.2 mm		1.75
44.4 mm		36
914.4 mm
McNeilus AutoReach Side LoaderMcNeilus®0637009, 1000161, 9370.6370092.5
63.5 mm		1.5
38.1 mm		38
965.2 mm
McNeilus AutoReach Side LoaderMcNeilus®0637010, 1100105, 1144707 9370.6370102.5
63.5 mm		1.5
38.1 mm		38
965.2 mm
McNeilus AutoReach Side LoaderMcNeilus®0642853, 1000075, 9370.6428533
76.2 mm		2
50.8 mm		31
787.4 mm
McNeilus AutoReach Side LoaderMcNeilus®0619882, 1000067, 1144703, 9272.604127, 9370.619882, 9370.6041273.25
82.5 mm		2
50.8 mm		38
965.2 mm
McNeilus AutoReach Side LoaderMcNeilus®9370.6349052
50.8 mm		1.25
31.8 mm		12
304.8 mm
McNeilus AutoReach Side LoaderMcNeilus®0634906, 9370.634906, 9370.6439062
50.8 mm		1.25
31.8 mm		20
508 mm
McNeilus Manual Side LoaderMcNeilus®0637010, 1100105, 1144707, 9370.6370102.5
63.5 mm		1.5
38.1 mm		38
965.2 mm
McNeilus Manual Side LoaderMcNeilus®0604125, 9272.604125, 9370.6041253
76.2 mm		2
50.8 mm		31
787.4 mm
McNeilus Manual Side LoaderMcNeilus®0619882, 1000067, 1144703, 9272.604127, 9370.604127, 9370.6198823
76.2 mm		2
50.8 mm		38
965.2 mm
Wittke ASL Automated Side LoaderWittke®FLHC-25, 010-99012.5
63.5 mm		1.75
44.4 mm		42
1066.8 mm
Wittke ASL Automated Side LoaderWittke®FLHC-292.5
63.5 mm		1.75
44.4 mm		36
914.4 mm
Wittke MSL Manual Side LoaderWittke®FLHC-25, 010-99012.5
63.5 mm		1.75
44.4 mm		42
1066.8 mm
Wittke MSL Manual Side LoaderWittke®FLHC-29, 010-9900, 110121-22.5
63.5 mm		1.75
44.4 mm		36
914.4 mm

Table A reproduces third-party listing values for identification and enquiry purposes only. It is not an HCIC specification and does not imply interchangeability with any listed part.

Non-OEM, Build-to-Order Statement

HCIC cylinders are aftermarket, build-to-order replacement cylinders. They are not original equipment parts, and HCIC is not an authorized distributor of, nor affiliated with, any original equipment manufacturer named on this page. Unless a customer supplies a drawing, sample or nameplate data, HCIC manufactures each cylinder to the drawing prepared by HCIC and approved in writing by the customer before production begins (the "Drawing for Approval" process). Fitness for a particular application depends on operating pressure, duty cycle, mounting geometry, fluid compatibility and vehicle configuration; the buyer is responsible for confirming suitability, and HCIC's responsibility is limited to conformity with the approved drawing and the written warranty supplied with the order.

Table B — HCIC build-to-order parameters

Vehicle modelHCIC Series Model No.TypeDimensions
E-Z Pack, HCSLA Side LoaderHCIC-ASL-TGR-0001Single-stage rodTo approved drawing
E-Z Pack, SLB Side LoaderHCIC-ASL-TGR-0002Single-stage rodTo approved drawing
Heil Formula 7000 Automated Side LoaderHCIC-ASL-TGR-0003Single-stage rodTo approved drawing
Heil Rapid Rail Automated Side LoaderHCIC-ASL-TGR-0004Single-stage rodTo approved drawing
Labrie Equipment Side LoaderHCIC-ASL-TGR-0005Single-stage rodTo approved drawing
Maxon, Side LoaderHCIC-ASL-TGR-0006Single-stage rodTo approved drawing
McNeilus AutoReach Side LoaderHCIC-ASL-TGR-0007Single-stage rodTo approved drawing
McNeilus Manual Side LoaderHCIC-ASL-TGR-0008Single-stage rodTo approved drawing
Wittke ASL Automated Side LoaderHCIC-ASL-TGR-0009Single-stage rodTo approved drawing
Wittke MSL Manual Side LoaderHCIC-ASL-TGR-0010Single-stage rodTo approved drawing

Table B lists HCIC's own build-to-order series numbers. Every HCIC cylinder is manufactured to the customer-approved drawing, so dimensions are not pre-set from the third-party values in Table A — they are fixed by the approved drawing for each order.

Why Refuse-Fleet Buyers Choose HCIC

Build-to-orderPer approved drawing
Drawing for ApprovalRequired before production
1 pcMOQ
18 moWarranty (written terms)
48 hrQuotation
22Documented configurations
10Compatible models
Design ref.ISO 6020 / 6022

About HCIC

HCIC International Group Co., Limited is a hydraulic cylinder manufacturer based in Jinan, China. Cylinders are designed with reference to ISO 6020, ISO 6022 and ISO 10100, and every build-to-order unit is manufactured only to the drawing approved in writing by the customer (Drawing for Approval), with a minimum order quantity of one piece and an 18-month warranty (written terms apply).

Our Factory

HCIC operates hydraulic-cylinder production facilities with in-house engineering in Jinan, China. In-house production covers tube honing, precision rod grinding and hard-chrome plating, CNC machining of mounts, pins and ports, robotic welding, assembly and pressure testing before dispatch. Multi-stage telescopic cylinders, single-stage rod cylinders and custom engineered units are all built to the drawing approved by the customer, with material and test records kept for every batch.

Ordering, MOQ & Lead Time

MOQ 1 piece

Order a single replacement cylinder. A non-recurring engineering / setup charge may apply to one-off custom builds.

48-hour quotation

Quotation within 48 business hours of receiving complete information (drawing, sample, or nameplate data).

Drawing for Approval

Every build-to-order cylinder starts with a formal HCIC drawing that you approve in writing before production.

18-month warranty

Warranty against defects in materials and workmanship, per the written warranty terms supplied with each order. Request the full warranty terms and exclusions document from HCIC before ordering.

Frequently Asked Questions

Are these side loader original equipment parts?

No. HCIC cylinders are aftermarket, build-to-order replacement cylinders. HCIC is not affiliated with, authorized by, or endorsed by E-Z Pack, Heil, Labrie, Maxon, McNeilus, Wittke or any original equipment manufacturer. Each cylinder is manufactured to a drawing approved in writing by the customer before production (the Drawing for Approval process).

Which side loader brands do these tailgate raise cylinders fit?

HCIC builds these cylinders to order for the side loader models documented on this page: E-Z Pack, Heil, Labrie, Maxon, McNeilus, Wittke. Vehicle names are used for identification only. Send your vehicle model and function position, and HCIC engineers will confirm the configuration and issue a drawing for your written approval.

What is the minimum order quantity for one tailgate raise cylinders?

The minimum order quantity is one piece. HCIC supplies these cylinders build-to-order: quotation within 48 business hours of receiving complete information, a drawing approved in writing by the customer before production, and an 18-month warranty per the written warranty terms supplied with each order. A non-recurring engineering / setup charge may apply to one-off custom builds.

Request a Quotation

Tell us the vehicle model, the function position, and attach your nameplate photo or drawing. We reply within 48 business hours.

Trademark & Third-Party Name Notice

Heil®, McNeilus®, Galbreath®, Leach®, E-Z Pack®, Dempster®, Wittke®, Pak-Mor®, Maxon®, Labrie®, Kann®, Accurate Industries™, Benlee™, G & H Manufacturing™, G-S Products™, Automated Waste™ and American Roll-Off™, and all other third-party names, model designations and part numbers on this page are the trademarks, trade names or identifiers of their respective owners. They are used solely to identify the vehicle application or function position for which a build-to-order replacement cylinder may be requested, because no other means of identification is reasonably available. Such use does not imply affiliation with, authorization by, endorsement by, or sponsorship of HCIC or its products by any such owner, and does not imply that any HCIC cylinder is an original equipment part or has been approved, tested or certified by any such owner.

Data Sources

[1] Parker Hannifin Corporation, Mobile Cylinder Division. Telescopic Mobile Cylinders [Z]. Youngstown, OH: Parker Hannifin Corporation, [n.d.], pp. 80–157 (Refuse Body Cylinder Application Guide). Crossover and application data as published: "for reference only; no other conditions are expressed or implied." Extracted 2026-10-16; used for identification and enquiry reference only.